This lower rack roller is a genuine replacement component designed to support the smooth and stable movement of the dishwasher’s bottom rack. Measuring approximately 1.5 inches in diameter and finished in charcoal gray, it ensures consistent rack alignment and ease of use during loading and unloading. For optimal performance, it is recomm...Read moreended to replace all four rollers simultaneously. Installation is straightforward and requires no special tools, though wearing protective gloves is advised. Sold individually.
Please be informed that this OEM-verified part that DOES NOT come with the heatshield, as per GE directly and are no longer required. This lower spray arm assembly is an essential component of your dishwasher, responsible for distributing water and detergent evenly during the wash cycle. Positioned at the bottom of the appliance, it spins...Read more to spray water in multiple directions, ensuring thorough cleaning of all dishes. A damaged spray arm can lead to poor cleaning results, leftover food residue, and even unpleasant odors. Common signs of failure include knocking sounds, wobbling, or restricted rotation. Replacing this part restores proper performance and prevents buildup that can cause bad smells. Installation is simple: release the locking mechanism, lift out the old arm, and secure the new one in place.
This dishwasher door latch is designed to secure the door during operation by connecting to the door strike and ensuring a tight seal. Mounted to the tub frame, it plays a critical role in enabling the appliance to run safely and efficiently. A damaged or faulty latch can prevent the door from staying closed, interrupting the wash cycle o...Read morer preventing it from starting altogether. This OEM replacement part is sold individually and does not include the door strike, which must be purchased separately if also worn or broken. Always disconnect the power supply before beginning installation.
The tub gasket, also known as the door gasket runs along the perimeter of your dishwasher basin and creates a seal that prevents water from leaking out when the tub is full. If you notice water on the floor after you run your dishwasher, it may be an indication that the gasket is loose or damaged. If your door gasket is damaged, it will n...Read moreeed to be replaced. To replace the gasket, simply pull the old gasket out of the groove it rests in, and press the new gasket into place. This part is made of black rubber and is sold individually.
This upper rack assembly is a genuine replacement part designed for select GE, Hotpoint, and Haier dishwashers. Engineered to securely hold dishes, cups, and glassware during the wash cycle, it helps prevent shifting and potential damage while promoting optimal water flow for thorough cleaning. The rack’s layout is designed to maximize us...Read moreable space within the dishwasher, improving load efficiency and cleaning performance. Constructed from durable materials, it resists wear and tear over time, ensuring long-term reliability. Compatibility should be verified using your dishwasher’s model number prior to installation.
The element heating assembly is found at the bottom of the dishwasher tub, and helps to warm the water in the wash cycle, and dry the dishes afterward. If the water does not heat up during the wash cycle, or the dishes are not being dried properly, you may need to replace the element heating assembly in your dishwasher. This element heati...Read moreng assembly is horseshoe-shaped and is sold individually. To replace your heating assembly, first make sure it has cooled down, then simply slide the connecting tabs out. Replace with a new heating element and your problem should be solved.
This lower rack and silverware basket replacement kit is a genuine OEM component designed for select GE dishwashers. Engineered to restore secure dish placement and organized utensil storage, the kit includes a durable lower rack and a matching silverware basket. It helps prevent shifting during the wash cycle, ensuring thorough cleaning ...Read moreand protecting dishes from damage. Ideal for replacing worn or broken racks, this kit supports optimal dishwasher performance and interior organization. Compatibility should be verified using your dishwasher’s model number prior to installation.
This is a flood switch assembly for your washer. The flood switch controls the hot and cold water filling your washer tub to ensure the proper amount of water. You may need to replace this part if your washer is overfilling or underfilling with water. It is about 5.5 inches in length, and mostly black in color with a green tip.
- Includes: 4 brackets, 4 roller wheel brackets, and 8 wheels part # WD12X26146
Dishwasher Lower Dishrack Carrier and Roller Kit (Set of 4). This kit will replace all four one piece roller carriers with two piece roller carriers. Match each carrier and cover designated for the side being replaced and replace all four carriers
This is a washer inlet valve assembly for your dishwasher. This valve allows water to flow into your dishwasher at the proper rate. If your dishwasher tub is not filling with water or filling when the appliance is not in use, you may need to replace the inlet valve. It measures approximately 3 inches by 4 inches and is made of metal and white plastic.
This mounting bracket is manufactured to secure your dishwasher to your countertop. Mounting brackets should be installed so the dishwasher doesn’t tip forward. You can fit the bracket to either the cabinet or countertop. This part is about 3 inches long and is made of metal. This kit does not include the screws, please order screws separately if necessary.
This OEM mid spray or center wash arm assembly distributes water and detergent in your dishwasher during the wash cycle. It has small nozzles that spray water onto your dishes and is located between the lower and upper rack. A broken assembly will result in weak water flow and ineffective dishwashing. It may also display signs of damage s...Read moreuch as cracks, breaks, or missing nozzles. Additionally, a malfunctioning assembly can cause imbalanced water flow, potentially leading to damage to other dishwasher components such as filters or pumps. Prompt replacement is necessary to ensure proper dishwashing performance and prevent further damage. To install this to your appliance, you will need to snap its mounting bracket onto the rack before attaching the arms onto it. This replacement part is sold individually.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No water flowing into dishwasher
38 of 47 peoplefound this instruction helpful.
Jeff from AUBURNDALE, MA
Easy
30 - 60 mins
Nutdriver, Screw drivers
We tried cleaning out the filter and it clogged with a huge amount of gunk. We removed the gunk, scrubbed the filter, and tried running the dishwasher, but still no water. That took over an hour (not counting the time the dishwasher spent running). Then we tried your diagnosis center and it pointed to the flood switch or the water valve.
... Read moreI extracted the flood switch (another 30-60 minutes) to check it, and it also contained gunk and (significantly) did not rattle, which made me suspect the flood switch was the problem, so I ordered one. Once the replacement arrived, I checked it and the flood switch rattled, confirming that it should work properly. I spent 30-45 minutes installing it, plus the filter assembly and racks I had to remove to access it. Ran the dishwasher and everything came out sparkling clean. I don't know where the gunk came from, but if you aren't getting water and the filter is full of gunk, check the flood switch.
Read less
Was this helpful?
Thank you for voting!
Diswasher not drying dishes
45 of 72 peoplefound this instruction helpful.
David from SHAWNEE, KS
Easy
30 - 60 mins
Didn't actually do the compete repair but got close. Pulled out dishwasher, disconnected and checked continuity on the existing heating element (about 16 ohms) the new element was also about 16 ohms. This indicates they both were working fine and no need for replacement. Next step would have been to swap the elements would have been
... Read moresimple. Tried to replace main board as well, still not the issue so giving up and replacing the dishwasher. It wasn't the high temp cut off thermostat either incidentally and no error codes in maintenance mode. Check continuity of your existing element before ordering to save aggravation.
Read less
Was this helpful?
Thank you for voting!
The dishes were not dry after the wash cycle
34 of 53 peoplefound this instruction helpful.
Daniel from JACKSONVILLE, AL
Really Easy
15 - 30 mins
Screw drivers, Wrench (Adjustable)
Open the washer, remove the bottom dish rack, then twist off the bottom water sprayer. Use a screwdriver to remove the mounting/ stabilizing screws so you can slide out the dishwasher. Close the dishwasher and slide it out. Underneath at the back there are two wires powering the drying element, carefully remove them. Use an adjustable wre
... Read morench to remove the two plastic mounting nuts for the drying element. Open the washer and remove the old drying element, and insert the new element. Reassemble the dishwasher in the reverse order if disassembly.