DCN681D1R (Type 1) DeWALT Nailer - Overview
Sections of the DCN681D1R
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Grommet
PartSelect #: PS10171452
Manufacturer #: 391814-00
This special grommet is an original part which is specially designed for use with DeWALT and Porter Cable staplers and nailers. It is utilized to secure the pin that holds the adjuster. This is a high...
$6.40
In Stock
SPRING
PartSelect #: PS12417694
Manufacturer #: 180527
This is an authentic replacement part that has been sourced from the original manufacturer to be used with pneumatic fasteners from Bostitch, Porter Cable, and DeWalt. The metal spring is part of the ...
$6.40
On Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken magazine end cap prevents magazine from latching closed
1. Use belt clip on staple gun to hold in place on workbench.
2. Use a hammer with a punch or small screwdriver to hit the two pins holding the end cap to the magazine. Repeat ad nauseum with as much force as you can muster until both pins come out and the broken end cap can be removed.
3. Align new end cap on magazine and use s ... Read more ame procedure to drive pins. Exercise caution with the shorter of the two pins. If not perfectly aligned, the plastic tabs on the end cap can easily break off.
2. Use a hammer with a punch or small screwdriver to hit the two pins holding the end cap to the magazine. Repeat ad nauseum with as much force as you can muster until both pins come out and the broken end cap can be removed.
3. Align new end cap on magazine and use s ... Read more ame procedure to drive pins. Exercise caution with the shorter of the two pins. If not perfectly aligned, the plastic tabs on the end cap can easily break off.
Read less
Parts Used:
-
Matthew from Morton Grove, IL
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!