Microwaves in your appliance are created by the magneton, and then they travel into the cavity of your appliance through a hole on the inside wall. This cover goes over that hole and acts as a filter, it allows the microwaves to pass through it and into your appliance to heat food. It also stops moisture and food particles from getting in...Read moreto the mechanisms of the microwave. The waveguide is found inside the microwave, attached by one or more screws to the right side or in the roof. If you notice that your waveguide has fallen off, has a hole in it, or is sparking or arcing during the cooking process, you will need to replace the part. A new cover is rigid and firm, but over time it becomes soft and flexible due to absorbing moisture.
NOTE: Remember to disconnect the power and discharge the capacitor from the microwave before starting this repair. The capacitor can hold a charge even when power is disconnected from the unit.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The wave guide cover was cracked
1 of 3 peoplefound this instruction helpful.
David from Bowie, MD
Really Easy
Less than 15 mins
Screw drivers
Anyone can perform this repair. Only a Phillips screwdriver is needed. Simply remove 3 screws, slip new guide in place and install the 3 screws. This is a 3 minute repair!