DCF899B (3) DeWALT Wrench - Overview

This nose cone conversion kit is designed for your impact wrench and includes the front housing and a 1/2 inch hog ring anvil. These components are located at the front end of the impact wrench and enable you to attach various accessories and sockets to the tool. If you notice any damage, wear, or a loose grip on the accessories or socket...Read mores, it may indicate the need for a replacement. To remove these parts, refer to your user manual for specific instructions on disassembling the front housing. Typically, you will need to unscrew the mounting screws that secure the nose cone to the wrench body and then proceed to remove the fasteners on the anvil. It is important to note that this OEM kit does not include any additional hardware.

This is an authentic replacement part that is sourced from the original manufacturer for use with hedge trimmers. The special screw is commonly used to secure the front guard assembly. This screw is sold as an individual replacement part, please note four screws may be required.

This synthetic gear grease is used to lubricate internal gears in power tools, reducing friction, wear, and noise during operation. Its high-performance formula helps prevent corrosion and protects moving parts under load. Applying fresh grease during maintenance restores smooth gear movement and extends tool life.

This is an original Craftsman replacement part sourced directly from the manufacturer. The roll pin is found in impact wrenches and multi-purpose saws from Craftsman. This metal part is used as a fastener to hold components together, and may be found in different parts of the machine depending on model. Please refer to the parts diagra...Read morem to be sure of ordering the correct part. You may require a punch set when replacing this item. This part is sold individually.

Genuine OEM replacement part, this item is sold individually. This spring is used in various locations of the tools listed below. Over time springs will loose their tension and will need to be replaced. The dimensions on this spring are 5/16 in length and 3/16 in diameter.

This is a genuine Dewalt replacement part, it is sold individually. The purpose of the Detent Pin is to secure sockets to the anvil on the Impact Wrench model numbers shown below. It is held in the anvil by use of a spring and pin.