DACE-7161 (Type 1) DeVilbiss Compressor - Overview

Frequently referred to as a Drain Plug, this Drain Valve is used to drain any condensation that has collected inside the tank to prevent the tank from rusting. It is not part of a kit or assembly, is sold individually, made of brass, is gold, and will be found at the bottom of the air tank. This part will need to be replaced when it is ...Read moreno longer able to provide a proper seal, or if it is visibly worn or damaged. You will need a wrench to complete this repair. Customers rate this repair as Easy.

Thread 18 TPI

This replacement screw is a genuine OEM sourced item commonly utilized on air compressors and pressure washers. It is a standard hardware which has multiple applications depending on the unit. Please make sure to check diagrams of your model for the correct location and used of this screw. This part is made from durable metal and it is sold individually. You will need a wrench to install or remove this hardware.

This is a genuine replacement part manufactured for use with air compressors. The sight glass is used to monitor the oil level inside the pump crankcase. This sight glass is sold as an individual replacement part.

This is a genuine OEM sourced replacement filter which is supplied for use with Porter Cable, Delta and DeVilbiss air compressors. Its purpose is to ensure the air that goes into the unit is free of dust and other contaminants. Over time the filter may get dirty and clogged restricting the airflow, inspect it periodically and replace as n...Read moreeeded to maintain peak performance. Please note this high-quality component is made of durable foam material and it is sold individually.

This is an original Porter Cable replacement part. The assembly filter is commonly found in compressors. This part is made of high-quality plastic and is used to house the filter. The item includes the front and back housing. You may require a screwdriver to replace this part.

This is a genuine DeVilbiss part for use with air compressors. The safety valve attaches to the manifold and pops open to relieve air pressure if the pressure switch fails to shut off the pump at the cut-off pressure setting. The most common reasons for replacing the safety valve is if the Valve is fouled/damaged or the air compressor run...Read mores for a while then turns off. This part is sold individually. The tools that you will need to replace the safety valve is a Phillip's screwdriver and a Ratchet/socket set.