My Orders
D55149 (Type 4) DeWALT Compressor - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$48.88
In Stock
AC CORD
Part #D26615
This power cord is a genuine high quality item, it is not an aftermarket imitation. It is sourced directly from original equipment manufacturer for use with electric air compressors. It is connected to a standard US outlet to supply power to the unit. Please note, this rubber insulated power cord is sold individually. You will need a screwdriver to replace this item.
$68.50
In Stock
Connecting Rod And Piston Asse
Part #N038785
This is a Genuine OEM replacement part designed for use with Air Compressors. This kit includes parts commonly responsible for low compression, including the piston and compression ring. Please note that this kit does not include the valve plate, head gaskets, or any other compressor parts. Replacing this kit you would need a Screwdriver and a Wrench.
$16.95
In Stock
Fan
Part #A11031
This is a genuine replacement part sourced directly from the manufacturer. The fan is commonly found in Craftsman air compressors. This part is made of high-quality plastic, and is placed in the cylinder/pump assembly to provide a cooling air flow. You may require a wrench or screwdriver when replacing this item. The fan is sold as an individual replacement part.
$6.40
In Stock
ORING P/L HEAD
Part #ACG-45
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. rnrnThere are many causes for O-Ring failure. The most common among power tools are: • Extrusion and Nibbling - The O-ring has ragged, tattered edges. ...Read moreThese are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that it too rough, contains grit or is too smooth to allow lubrication. • Over Compression - The O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • Heat Hardening - The O-ring has a pitted or cracked surface, and is often flattened on both sides. Caused by temperature exceeding o-ring capacity. • Weather/Ozone Cracking - The O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching (greater that 5%) causes similar cracking.
Read less
$6.40
In Stock
ASSY FASTENER
Part #ACG-408
This assembly fastener is supplied directly from the original equipment manufacturer. The screws are constructed of metal, and are compatible with many compressor machines. This part is often used to secure the compressor shroud. It is recommended to refer to specific manual and diagrams for repair instructions. This part is sold individu...Read moreally. Purchasing spare screws is also encouraged, as they can wear out over time and regular use. A hex key and a screwdriver are helpful in the removal and replacement.
Read less
$68.64
In Stock
Carbon Brush
Part #A10157SV
$53.07
In Stock
Belt
Part #N011005
it is a genuine item that is supplied directly from the original equipment manufacturer for use with Craftsman air compressors. This high-quality belt provides an identical replacement for a missing or damaged component that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the...Read more correct location and application of this item. Keep in mind this high-quality belt is made of durable rubber and is sold individually,
Read less
$6.40
In Stock
O-RING
Part #A03856
This O-ring is compatible with various models of compressors made by DeWALT, Black & Decker, and Bostitch. It is an authentic replacement part from original manufacturer. An O-ring is used to prevent pressure loss between joined rigid parts by creating a seal. Many tools require working O-rings in order to function. Please check that the ...Read morecorrect O-ring is being used in the correct position, as many tools use multiple different O-rings throughout. Sold individually.
Read less
$6.40
In Stock
SCREW .250-20X.750 U
Part #SSF-586
It is a genuine manufacturer-sourced replacement screw which is specially designed for use with air compressors. This is a standard hardware which has multiple applications depending on the model of your unit, make sure to check appropriate diagrams for the correct location and use of this item. It is a high-quality hex head screw which i...Read mores made of durable metal and it is sold individually, over time the threads may wear out eventually requiring a replacement.
Read less
$41.22
In Stock
REGULATOR REPAIR KIT
Part #N008792
This air compressor regulator repair kit restores proper pressure control and airflow by replacing worn internal components such as seals and the piston. Designed to address leaks or inconsistent pressure, it helps return the regulator to reliable working condition. Replacing damaged parts with this kit can improve performance and ensure consistent operation.
$26.47
In Stock
Cover Pressure Switch
Part #A17326
It is a genuine item that is supplied directly from the original equipment manufacturer for use with air compressors. This is an identical replacement for a missing or a faulty cover for the pressure switch, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. It i...Read mores a high-quality part which is made of durable plastic and is sold individually, keep in mind it includes the plastic cover with a red knob. Note, the switch itself is sold separately.
Read less
$6.40
In Stock
CUP SADDLE MOUNT
Part #ACG-18
This saddle mount cup is an OEM direct from Craftsman for air compressors. This part holds the screw in place. You will need a wrench to remove the bolts that go through it. It is recommended that you wear gloves when replacing this part. This saddle mount cup is made of steel and sold individually.
Common Symptoms of the D55149
How this model fails, and the parts that fix it.
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More