D25MHV (UT-08105) Homelite Leaf Blower / Vacuum - Overview

This is an authentic replacement screw which is supplied by the original equipment manufacturer for use with handheld lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this item. This high-quality Torx screw is made of durable metal and it is sold individually.

This starter pulley is an OEM part direct from Ryobi. This part is compatible with a variety of lawn and garden devices. The pulley is most often fitted between the air baffle and the container w/spring within the starter assembly. Please consult specific manual and diagrams for repair instructions. This part is sold individually. A screwdriver and a hex key are usually needed in making the replacement.

This 3-inch-long flexible rubber tubing connects the fuel filter to the carburetor of your handheld lawn equipment, ensuring a clean and uninterrupted fuel supply for combustion. If broken, it may leak fuel due to cracks or holes, and the engine can stall, idle roughly, or have difficulty starting. If the damaged rubber tubing is not repl...Read moreaced, it can allow contaminants to enter the fuel system and clog the carburetor. It may also result in fuel starvation, causing the engine to run lean and potentially overheat. To remove the rubber tubing, first, ensure the engine is shut off and cooled down. Remove the wire and boot from the spark plug. Lift the tab on the air filter cover to release it, then remove the cover. Using a flathead screwdriver, pull the tubing from the carburetor ports. Use a torx bit to unthread the mounting screws that secure the fuel tank. Once the fuel tank is detached, you can fully disconnect the tubing. Keep in mind that this OEM replacement part is sold individually, so make sure to confirm the quantity needed for your machine before making a purchase.

This manufacturer sourced part is designed for use with Homelite and Ryobi handheld lawn and garden equipment. It an identical replacement for a missing or a damaged screw that was installed on a new unit. This is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model ...Read morefor the correct location and application of this component. Keep in mind this high-quality screw is made of durable metal and is sold individually.