Quick Question!

Have you ever purchased from PartSelect.com before?

Models > CWG401

CWG401 Maytag Wall Oven - Overview

Get Parts and Repair Help for CWG401

If you know the wall oven repair part you need, you can browse the list of all parts on the CWG401, or you can search by name or part description. You can also find your part by where it is located on the CWG401 by selecting a section below. We’ve also included any installation videos we have for CWG401 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$23.78

2 Piece Broiler Pan

This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high tem...

$33.58

SEAL- DOOR

This oven door seal creates a protective seal around an oven door to prevent heat from running out of a closed oven and keeps room air from entering the oven. This part is 17.5 inches long and made of rubber. The metal hook on both ends of the seal is there to keep it in place. Remove screws to take off old seal using pliers and replace it with the new seal. For detailed installation instructions and accurate guidance, refer to the diagram provided by the manufacturer. As a safety precaution make sure to unplug oven from power source and wait for oven to cool before starting this replacement project.

$9.08

Light Bulb Socket

This light bulb socket is located inside the oven cavity.

$2.96

Frame Screw

Sold Individually.

$2.96

Screw - 6-32 x 5/16

This screw is well under an inch long, and is made of metal.

$18.30

Anti-Tip Screw

Sold individually.

$34.20

Door Side Seal

Sold individually. Order quantity required.

$4.94

SPACER- DO

$69.93

Flat Style Oven Ignitor

This flat style gas oven igniter has a body length of four and a half inches. This oven ignitor glow bar comes with a bracket and a wire harness. Use it for your Maytag brand gas r...

$13.77

Nut

This part is sold individually. This nut can be found in various appliances including a dishwasher, air conditioner, washer, dryer, range/cooktop, oven, freezer, range hood, and refrigerator. There is a serrated pattern along the edge of the nut, which helps to avoid loosening while the appliance is in motion. Nuts may corrode or rust over time and will need to be replaced. You will need a wrench to screw the nut into place. This genuine OEM part comes directly from the manufacturer.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Light Switch Was Broken

  • Customer: REY from GAINESVILLE, TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 11 of 15 people found this instruction helpful
I removed screws that hold cover and put cover aside. I removed the buttons and removed glass cover. I pulled panel out far enough t get tswitch wires and installed switch. Be very careful not to let wires touch metal. read more

The old light switch was broken

  • Customer: James from Charleston, AL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 4 of 6 people found this instruction helpful
The replacement switch was slightly larger than the old one so it would not go through the hole in the front panel so I had to get a reaming tool and enlarge the hole just a little for the switch to go through. It was still an easy repair as I had the proper tool. read more

Purchased home but stove had no broiler pan.

  • Customer: Raymond from BLOOMINGTON, MN
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
Purchased 2 piece broiler pan from this site read more