EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

CWE4800ACS14 Maytag Wall Oven - Overview

Diagrams for CWE4800ACS14

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 40W – Part Number: 8009
$19.54
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(78)
Part #8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.
Range Bake Element – Part Number: WPY04000066
$49.50
In Stock
Range Bake Element
★★★★★
★★★★★
(68)
Part #WPY04000066
The bake element is the heating element that is found at the bottom of the oven and is responsible for 90 percent of the bake heating. This spade style bake element is 16 inches wide, and connects with push-on wire terminals. It has a terminal depth of three inches and a total element length of nineteen inches. You may need to replace the heating element if your oven produces little to no heat, the oven will not heat evenly, or the element will not heat at all. This element comes with an instructions sheet and is intended for use with electric ovens. To see if this part will fit your oven, please check the list of compatible brands below.
Dryer Screw – Part Number: WP90767
$7.47
In Stock
Dryer Screw
★★★★★
★★★★★
(2)
Part #WP90767
This screw is sold individually.
Oven Rack – Part Number: 71003346
No Longer Available
Oven Rack
Part #71003346
This oven rack is sold individually. The functionality of the oven rack is to provide a reliable cooking surface for cookware inside your oven. This specific oven rack is roughly eighteen inches wide and seventeen inches deep. You will find from the image provided that this oven rack is silver in color. Users have ranked this installation process as easy, and that it will take you less than fifteen minutes to complete. In order to install your oven rack make sure that your range has been turned off and cooled down. No tools are required to install this oven rack.
Door Hinge – Part Number: 74001984
$90.63
In Stock
Door Hinge
★★★★★
★★★★★
(8)
Part #74001984
This door hinge is a genuine OEM replacement part for your wall oven. Replacing this part will require partially removing your oven from the wall, to access the hinge. This part contains one hinge, although it is recommended to replace both at the same time. You will need a Phillips screwdriver to unscrew the hing assembly and install the new one.
Range Frame Screw – Part Number: WP7101P126-60
$7.47
Special Order
Range Frame Screw
★★★★★
★★★★★
(1)
Part #WP7101P126-60
Sold Individually.
Stand Mixer Screw – Part Number: WP4159193
$8.55
In Stock
Stand Mixer Screw
★★★★★
★★★★★
(1)
Part #WP4159193
This screw is sold individually.
Screw – Part Number: WP98008545
$7.47
In Stock
Screw
★★★★★
★★★★★
(1)
Part #WP98008545
Sold Individually.
Broiler Pan with Roasting Rack – Part Number: W10123240
$82.56
On Order
Oven Light – Part Number: WP74011278
$79.25
On Order
Oven Light
★★★★★
★★★★★
(3)
Part #WP74011278
This oven light assembly is a little over four inches long and comes with the lens and 660-watt light bulb. Make sure your appliance is unplugged or circuit breaker is off before installing this new part. It is located inside the oven and may need to be replaced if the socket has failed, causing the light to not come on inside the oven. It may also need to be replaced if you notice that the glass is broken and the whole assembly needs to be replaced. The part is located in the upper right hand side of the oven. To reach the bulb you will need to open the oven door and remove the upper rack.
Broil Element - 3000W – Part Number: WP7406P203-60
$91.43
In Stock
Broil Element - 3000W
★★★★★
★★★★★
(3)
Part #WP7406P203-60
This broil element is found on the roof of the oven.
Touch-up Paint - Black – Part Number: 72032
$24.15
In Stock
Touch-up Paint - Black
★★★★★
★★★★★
(5)
Part #72032
This authentic OEM black touch-up paint is specifically designed for repairing minor scratches, chips, or blemishes on your kitchen appliances. The bottle contains 16ml or 0.6oz of black paint and has an applicator brush under the cap, the same way a nail polish bottle is designed. Restoring these visible damages is important because cracked or chipped surfaces can become a breeding ground for dirt and bacteria. If your existing bottle of paint has a thick or clumpy consistency, do not use it. Remember to shake the bottle before applying the paint to your appliance. Please keep in mind that this bottle is sold individually.

Questions And Answers for CWE4800ACS14

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lance - For model number CWE4800ACS14
December 31, 2023
I need to replace the oven door tension springs.
Chris Boyle Profile
Hello Lance, thank you for the question. The tension spring does not come separately. It comes with the door hinge, part number PS2080677. We hope this helps!
$90.63
In Stock
Door Hinge
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the CWE4800ACS14

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
bottom heating element in oven disintegrated
67 of 74 people found this instruction helpful.
  • DENISE from GERMANTOWN, TN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I threw away the old pieces.

Then I connected the two wires on the new element. I pushed the wires back in the insulation in the wall of the cabinet. Then I inserted the two screws and t ightened them in.

SUPER EASY!!!!!

This $40 part saved me $1500 on a new double wall oven.
Was this helpful?
Thank you for voting!
Oven heating element blew out
33 of 39 people found this instruction helpful.
  • Shirley from Dallas, TX
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Removed 2 screws, pulled element out. My husband used an ohmmeter to see if the electricity needed to be turned off. It showed no voltage. He could not remove electrical connectors by hand, so he used insulated pliers. When he touched the connectors, a shower of sparks covered the inside of the oven and tripped the breaker switch. Th en we noticed the pliers were welded to the side of the oven. Thankfully the pliers had insulated handles and he was not hurt. It might be a good idea to put in the instructions to TURN OFF POWER TO OVEN in the breaker panel because our oven was definitely HOT. Oven works perfectly now.
Was this helpful?
Thank you for voting!
Element was burned through
14 of 15 people found this instruction helpful.
  • Kevin from New London, OH
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I used tiny amount of WD40 on old screws,let sit for 2 minutes. Tapped the screws(2) of them with a small hammer to wake them up, I had a cordless drill and they backed right out. Pulled the old element out, used needle nose pliers to pull connectors off of the element(wiggle gently) put the new element on, reinserted back in the oven,att ached with new screws that came with the element, started the oven. Worked Perfect!!!
Was this helpful?
Thank you for voting!