CT80701 Homelite Pressure Washer - Overview

This thermal release valve is for pressure washers. Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal operating temperatures. Wear work gloves to protect your hands when installing this part.

This is a genuine OEM sourced replacement part. The quick disconnect is intended to be used with pressure washers from Ridgid, Ryobi, and Homelite. The quick disconnect is used a the female portion of a coupler that links the hose to the pump assembly. This item is available as an individual replacement part.

It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution from the tank to the pump. Over time the tube may develop cracks allowing for leaks, if this happens this part can easily be replaced. It is made of durable flexible rubber material and it is sold individually.

This is an original part from Homelite. The lock nut (m8 x 1-1/4 mm) is compatible with many pressure washers, and is sold individually. The metal lock nut helps to secure various components of the pressure washer. A wrench, hex key and screwdriver are often needed for the installation.

This seal is designed for pressure washers made by Ridgid, Homelite and Ryobi. It is made of metal and fits onto the idle down assembly. A wrench may be required while replacing this part. Please keep in mind that two seals may be required during installation, but this part is sold as a single item. This is an authentic OEM part.

This is an OEM part sourced from the original manufacturer for use with pressure washers. This stainless steel spray wand screws into the trigger handle assembly, giving a 21" reach. One spray wand is included.

This is an authentic OEM quick connect nozzle, guaranteed compatible with the Ryobi and Homelite machines listed below. This is a standard green pressure washer tip with a twenty-five (25) degree spray width. It is a nozzle used for regular cleaning duties such as removing dirt from decks or cars, and works very well with soap/detergents...Read more. It is one step more powerful than the white forty degree tip (the least powerful of the quick change nozzles). This is a commonly used nozzle so a backup would come in handy. Sold individually.

This assembly uses a control wire inserted directly into the throttle arm to control engine's speed. If your engine doesn't idle down replacing this part should resolve the issue. Please make sure to check appropriate diagrams of your model for correct location and use of this item. It is made of durable metal and it is sold individually.

This is an authentic manufacturer-sourced replacement part which is specially made for use with Ridgid, Homelite and Ryobi pressure washers. Please make sure to refer to the appropriate diagrams for your model for the correct location and application of this idle down bolt. Keep in mind this high-quality part is made of durable metal and is sold individually. A wrench will be needed to secure or remove it.