CS33EA Hitachi Saw - Overview

The fuel pipe/fuel line assembly is a genuine OEM parts kit used in gas-powered outdoor equipment with dimensions of 5mm x 160mm. It includes a pipe or line, which carries fuel from the tank to the carburetor, and a rubber grommet which holds the fuel line in place. The grommet also has a flange that prevents it from being pulled into the...Read more body of your equipment. Over time the grommet may wear down and the fuel line can become brittle and crack causing fuel leakages and difficulty starting or running your equipment. Therefore, it is important to routinely inspect this assembly and replace it when it shows signs of wear. Before your repair, drain the fuel for your safety and to prevent contaminating the fuel tank. To install a new fuel pipe assembly, simply pull off the old grommet and detach the fuel line. Carefully insert your new fuel line into the new grommet and connect the line to the carburetor and the fuel filter inside the fuel tank on your equipment.

This is a genuine manufacturer-sourced component which is specially made for Tanaka and Hitachi chainsaws. It is an identical replacement for a missing or a faulty Guide Plate-B that was installed on a new unit. Please make sure to check the owners manual and the appropriate diagrams of your model for the exact location and application of...Read more this part. Keep in mind this high-quality plate r is made of durable metal and is sold individually. Note, the #6695906 Tensioner Assembly is sold separately.

This genuine manufacturer sourced replacement component which is specially designed for use with Tanaka and Hitachi handheld lawn and garden equipment. It helps to distribute the pressure evenly between connected parts to ensure the proper fit. This is a standard hardware which has multiple applications based on the model of your unit, pl...Read moreease refer to appropriate diagrams for the correct location and use of this part. It is made of high-quality metal and it is sold individually.

This is an original Tanaka replacement part. The bar clamp nut is designed by the manufacturer for use in chainsaws, pruning saws, and hedge trimmers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different nuts used in the machine. Refer to the par...Read morets diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. This part is sold individually.

This is a genuine replacement part sourced directly from the manufacturer. The starter pawl is commonly found in chainsaws, pruning saws, and grass trimmers from Tanaka and Hitachi. This part is made of high-quality plastic, and is placed in the magneto rotor assembly. You may require a wrench and pliers when replacing this item. The starter pawl is sold as an individual replacement part.

This is an original part. The oil tank cap gasket is made of plastic, and has been designed for use with several chainsaw models. This item is fitted into the oil tank cap, providing a seal between the cap and the fuel tank. No tools are necessary for making the replacement. This part is sold individually.

This is an original Tanaka replacement part. The side cover is designed by the manufacturer for use in chainsaws. This part is made of high-quality plastic, and is used to secure and protect the brake and clutch assembly. You may require a wrench when replacing this item. This product is sold individually.