CS-4920 (C92115001001 - C92115999999) Echo Chainsaw - Overview

This flanged hex nut is a genuine OEM steel fastener specifically designed for use in chainsaws and chop saws, serving the purpose of securing various components in these outdoor power equipment devices. It features a flange base that acts as a built-in washer for extra stability and security. The hex nut has a diameter of 6mm, and its th...Read morereaded shaft has a pitch of 20, ensuring a secure and reliable connection. Over time, the bolt can be susceptible to corrosion, cracks, or worn threads, which may result in the loosening or detachment of the connected parts. Detectable signs of such issues include excessive noise, vibrations, and equipment instability. To address this, it is recommended to inspect all bolts within your equipment and replace any that are no longer functioning properly. To replace the bolt, simply use a wrench or socket to loosen and remove the old one, position the new bolt on the mounting surface, and securely tighten it until the flange is flush against the surface. Please note that each flanged hex nut is sold individually.

Used in over 150 models of outdoor power equipment, this clip is commonly used to clip fuel lines or other hoses/tubes in place. It is sold individually, not as part of a kit or assembly, made of metal, and is silver in color. When this clip becomes damaged or worn, it can no longer support the fuel line, which may cause a fuel leak and...Read more/or smell. This wear will occur as part of regular use of your equipment. To complete this repair, you will need a wrench, screwdriver, and pliers. It is found in a variety of locations depending on your model; please refer to your owners manual for the exact location. Customers rated this repair as Easy.

This spark plug is a genuine OEM part that is used on gas-powered lawn and garden equipment. The spark plug creates the spark that ignites the fuel and air mixture inside the engine, allowing it to run. It comes in a cylindrical shape with a ceramic insulator and a metal electrode that protrudes from the top. If your spark plug is faulty,...Read more your small engine may misfire, have difficulty starting, consume more fuel or not start at all. To check that the spark plug is faulty, you will need to use a spark tester to test it for electrical failure. Once you have done so, you can remove the faulty spark plug using a spark plug socket and ratchet. Place the new spark plug in to the socket and use your hands to carefully thread it into the engine. It is important to note that you should not wait until your spark plug is faulty to replace it. It should be replaced regularly as part of your annual small engine maintenance.

This is an authentic Echo replacement part, sourced from the original manufacturer for use with hedge trimmers. The special torx head screw is commonly used to fasten the gearcase cover. This screw is available as an individual replacement part, please see model diagram for associative parts.

It is a genuine OEM approved replacement item specially designed for use with Echo gas powered handheld tools. This replacement fuel-strainer/filter fits inside of the fuel tank. The purpose of this item is to filter out dirt and debris from contaminating engines. Over time fuel filter will get clogged and restrict the fuel getting to the...Read more carburetor. At this point filter should be replaced. This filter consists of a metal body with fabric filter material and it is sold individually.

This is an original replacement part manufactured for use with Echo chainsaws. The oil strainer filters oil as its is picked up to lubricate the chain. Proper lubrication between the chain and bar cuts down on friction extending the life of the saw. It is recommended to check the oil strainer before each use, and to clean or replace as necessary to prevent blockage. The oil strainer is sold individually.

This authentic OEM sourced component is specially made for use with Echo handheld lawn and garden equipment. It is an identical replacement for a missing or a faulty terminal-spark plug cap spring that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application ...Read moreof this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually. Note, the #A427000013 Cap-Spark Plug is sold separately.

This authentic manufacturer-supplied component is made for use with Echo and Shindaiwa handheld lawn and garden equipment. It is a standard hardware which may have multiple applications. Please make sure to check the owners manual and the appropriate diagrams of your model for the exact location and application of this part. Keep in mind this high-quality screw is made of durable metal and is sold individually.

This is an authentic OEM sourced part that is intended to be used with chainsaws and pruners from Echo and Shindaiwa. The plastic cap connector is used as a tether that keeps the fuel tank or oil tank cap connected to its respective tank. This item does not require tools to install and is sold as an individual replacement part.

This authentic OEM sourced replacement part is designed for use with Echo chainsaws. It fits over the bar and it is what cuts the material, blades have small-radius working corners for best performance. Over time the chain may stretch and become dull eventually requiring replacement to maintain clean cuts. It is made of high-quality metal and it is sold individually.

This is an OEM part sourced directly from the manufacturer. The spring is commonly found in chainsaws from Echo and Shindaiwa. This part is made of metal, and is generally used to apply tension to the brake band. Please be aware that there are different springs used in the machine. Refer to the parts diagram to be sure of ordering the...Read more correct part. You may require a wrench, screwdriver, and pliers when replacing this item. The spring is available as an individual replacement part.

This is a genuine replacement part manufactured for use with outdoor power equipment. The fuel vent is used to allow air into the tank while not allowing air or fuel out. As fuel in the tank is drained to the carburetor air needs to take its place otherwise a vacuum would occur inside the tank prohibiting fuel from draining to the carbure...Read moretor. The vent assembly is just pressed into the slot on the tank, but a screwdriver may be needed to remove the housing. This vent assembly is sold individually.