CS-360TES (37001001-37999999) Echo Chainsaw - Overview

This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sold individually. This part will be found in various locations, depending on your model; refer to your owners manual to locate it on your mach...Read moreine, but is commonly found on the side of the air cleaner or carburetor. To complete this repair, you will need a screwdriver. The Purge Bulb needs to be replaced when it is cracked or damaged. It will become fatigued through regular use and may leak fuel when it is malfunctioning. Customers rated this repair as Easy.

This flanged hex nut is a genuine OEM steel fastener specifically designed for use in chainsaws and chop saws, serving the purpose of securing various components in these outdoor power equipment devices. It features a flange base that acts as a built-in washer for extra stability and security. The hex nut has a diameter of 6mm, and its th...Read morereaded shaft has a pitch of 20, ensuring a secure and reliable connection. Over time, the bolt can be susceptible to corrosion, cracks, or worn threads, which may result in the loosening or detachment of the connected parts. Detectable signs of such issues include excessive noise, vibrations, and equipment instability. To address this, it is recommended to inspect all bolts within your equipment and replace any that are no longer functioning properly. To replace the bolt, simply use a wrench or socket to loosen and remove the old one, position the new bolt on the mounting surface, and securely tighten it until the flange is flush against the surface. Please note that each flanged hex nut is sold individually.

Genuine OEM replacement part, this part is sold individually. The Bevel Gear is part of the chain tensioning assembly of the chainsaws listed below. This part aid in loosening and tightening the chain on the chain bar.

This is a genuine manufacturer approved replacement part designed for use with chainsaws. This part is an essential part of chain tensioner mechanism. When replacing this part you will need a screwdriver. It is made out of metal and it is sold individually.

This is an Authentic Part sourced from Original Manufacturer. This part is made out of Metal and it is Sold Individually. If the chainsaw bar doesn't adjust when you turn the tension screw usually the tension gear/pin or the adjustment bolt is worn or damaged.

Used in over 150 models of outdoor power equipment, this clip is commonly used to clip fuel lines or other hoses/tubes in place. It is sold individually, not as part of a kit or assembly, made of metal, and is silver in color. When this clip becomes damaged or worn, it can no longer support the fuel line, which may cause a fuel leak and...Read more/or smell. This wear will occur as part of regular use of your equipment. To complete this repair, you will need a wrench, screwdriver, and pliers. It is found in a variety of locations depending on your model; please refer to your owners manual for the exact location. Customers rated this repair as Easy.

This replacement oil cap is specially manufactured for Echo and Shindaiwa chainsaws. It is an authentic OEM part, not an aftermarket equivalent. It is used to keep the oil in the tank. This assembly includes a retainer that remains in the tank to prevent the cap from falling out. It is made out of strong plastic material and it is sold individually.

It is an authentic OEM sourced item that is specially produced for use with Shindaiwa and Echo handheld lawn and garden equipment. This screw is generally used to secure the housing, please make sure to check appropriate diagrams for correct location and use of this hardware. One torx screw is included per order.

This spark plug is a genuine OEM part that is used on gas-powered lawn and garden equipment. The spark plug creates the spark that ignites the fuel and air mixture inside the engine, allowing it to run. It comes in a cylindrical shape with a ceramic insulator and a metal electrode that protrudes from the top. If your spark plug is faulty,...Read more your small engine may misfire, have difficulty starting, consume more fuel or not start at all. To check that the spark plug is faulty, you will need to use a spark tester to test it for electrical failure. Once you have done so, you can remove the faulty spark plug using a spark plug socket and ratchet. Place the new spark plug in to the socket and use your hands to carefully thread it into the engine. It is important to note that you should not wait until your spark plug is faulty to replace it. It should be replaced regularly as part of your annual small engine maintenance.

This OEM metal washer is commonly used on a variety of different small engine/lawn equipment models and is sold individually. This washer is used to help evenly distribute pressure from the securing bolt or screw with the cylinder cover, to reduce any effects of vibration from the engine. If the connection between the securing fastener be...Read morecomes loose, or if you are replacing the fastener itself, it is recommended that you replace this washer as well.