COM530M (0132510007) DeLonghi Espresso Machine - Overview

This is an original Delonghi part. This Valve is used in many models of Delonghi espresso makers. The Valve is made mostly of plastic and contains springs and gaskets. The Valve is designed to be a pressure relief in the event that the water cannot flow through correctly. This valve should be replaced if water is bypassed to the tank when...Read more under low pressure. Tools needed: • Screw driver • Adjustable wrench • Needle nosed pliers

Genuine Delonghi replacement part, this item is sold individually. This O-Ring is used as a seal to keep liquid from leaking between two connected parts. Because of the heat that this part comes in contact with it does wear out often. It is advised to have an extra one or two on hand.

This small metal spring is commonly used in coffee makers to connect interior valves and tubes. It secures the seal between these parts to prevent moisture leakage. This OEM part is made by the manufacturer and is guaranteed to be dependable in multiple models of machines. Please note that it is sold individually and more than one spring may be needed per machine.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with DeLonghi coffee makers. The pump is utilized to supply milk to the frother. Over time components may wear out and it may begin to malfunction or to quit working completely, eventually requiring a replacement. Always check the diagrams of y...Read moreour model and the owners manual before beginning the repair. Keep in mind this high-quality plastic body pump is sold as an individual unit. You will need a screwdriver to take the housing apart in order to perform this repair.

This is a genuine DeLonghi replacement part guaranteed to fit the machines listed below. This steam nozzle fits at the end of the frother tube, inside the removable milk frother body/cover. It is secured by two (2) o-rings (sold separately). This listing includes only the one (1) steam nozzle. This steam nozzle is also included in Frother Assembly, part # 7313219311.

This is a Genuine OEM replacement part for use with DeLonghi Coffee Maker. That part consists of Glass Body, Plastic Handle and Lid and a Metal Band. The function of this Carafe is to contain all brewed coffee until it is ready to be served.

This authentic OEM impurity filter, also known as a pass through filter is a replacement part for coffee makers. It controls the flow of water through the coffee grounds and allows water to pass through while holding back the coffee grounds. The filter is an essential component for the proper extraction of flavors and aromas from the coffee.

This part has been manufactured for use on many models of espresso makers. The Frother Body is made of a high temp plastic and has a stainless steel housing. The Frother Body is used to aid in proper frothing of milk. This part simply slips onto the frother tip and clips into place. Other parts that are commonly purchased with the Frother...Read more Body include the Lower Froth Tube O-ring (part number 533135) and the Milk Regulator O-ring (535692).

This is an authentic DeLonghi replacement part that has been sourced from the original manufacturer to be used with espresso/cappuccino/coffee makers. The metal spring is used to provide compression between the diffuser and the valve. This item is available as an individual replacement part.