CN80F Max Nailer - Overview

This is an authentic Max replacement part manufactured for use with pneumatic nailers and staplers. The special o-ring is commonly used as a spacer or a seal between part assemblies. The o-ring is used with several different models of nailers and can have different applications depending on the model. This o-ring is available as an individual replacement part, please see model diagram for part location and usage.

This part is an OEM from the MAX manufacturer. The rubber washer 7 is compatible with many nailer devices. This item often secures the step pin in the feed pawl. It is recommended to refer to specific manual and diagrams for repair instruction. The rubber washer 7 is sold individually. A hex key and a wrench are helpful in making the replacement.

This part is made of metal and is available individually. The torsion spring attaches to the feed pawl. A set of pliers might be helpful during the installation of this item. It may become bent or broken and will need to be replaced. This is a genuine Max part sourced directly from the manufacturer for use in nailers.

It is a genuine item that is supplied by the original equipment manufacturer for use with Max nailers and staplers. The roll pin attaches to the protector. A set of pliers might be necessary during the installation of this part. This item is made out of metal and will need to be replaced if it breaks. This part is sold individually.

This is an authentic Max replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers. The exhaust seal is used to provide compression and to seal the connection between exhaust cover and the end cap. This item is available as an individual replacement part.

This genuine manufacturer-sourced part is specially designed for Max nailers. It is an important component which provides a tight seal between connected components. Unfortunately, over time it will wear out and it may begin to crack eventually requiring a replacement. To ensure the correct repair procedure, refer to the appropriate diagra...Read morems for your model. Note, this high-quality O-ring is made of durable rubber material and is sold as an individual item. A screwdriver will be needed to take apart and reassemble the tool when performing this repair.

This is an authentic Max replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers. The metal hanger attaches to the body of the nailer and is used to hang up the nailer when it is not in use. The item does not require tools to install and it is sold individually.

The bolt attaches to the cylinder cap. This authentic item is supplied directly from the original equipment manufacturer for use with Max nailers. This part is sold individually and is made of metal. An allen wrench will be helpful during the installation of this part. It will need to be replaced if it strips or breaks.