CHS900P4M1W2 General Electric Range - Overview

Diagrams for CHS900P4M1W2

See every part. Know exactly what you need.

Parts for the CHS900P4M1W2

$30.53

Temperature Sensor

★★★★★

(56)

Part #WB21X22134

The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature inside your oven while it is on and send the temperature back up to the electronic control, which adjusts as necessary. If your oven is havi...Read more

Read less

$16.05

Door Handle Fastener

★★★★★

(11)

Part #WR01X11007

This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.

$39.95

Oven Light Housing

★★★★★

(12)

Part #WB08T10002

The light housing is also known as a lamp holder and is a part for the oven in your range. The function of this piece is to hold the bulb that will light up the inside of your oven. As per the manufacturer instructions, if your bulb has burnt out you must buy the bulb for this part locally. This light housing is roughly five inches high, ...Read more

Read less

$16.05

Range Screw

Part #WB1K5062

$17.28

Range Leg Leveler

★★★★★

(5)

Part #WB02K10182

$16.05

Screw

★★★★★

(1)

Part #WR01X10065

Size: 10-32 GXTT FLP .595 Sold individually.

$64.77

Terminal Block Kit

★★★★★

(13)

Part #WB17T10011

This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

$16.05

Range Screw

★★★★★

(2)

Part #WB01T10008

This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to connect the different parts of your oven door. This part is an authentic OEM part sourced directly from the manufacturer.

$35.80

Range Board Sensor

Part #WB27X28659

$74.79

OVEN RACK

★★★★★

(1)

Part #WB48X21508

Sold individually.

$19.50

SCREW

Part #WB01K10091

$18.58

FRONT GASKET Assembly

Part #WB35X28743

This genuine OEM front gasket assembly is designed to seal the gap between the oven door and the cooking cavity, helping retain heat and maintain consistent cooking temperatures. Made from durable, heat-resistant material, it supports efficient operation by minimizing heat loss during use. Replacing a worn or damaged gasket can correct is...Read more

Read less

Questions And Answers for CHS900P4M1W2

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Elaine - For model number CHS900P4M1W2

December 29, 2023

The part that the knob to my GE Cafe Range looks like a switch that moves around once knob is inserted

Hi Elaine, thank you for getting in touch. The part you are looking for does not come separately. It comes in an assembly with the LED encoder board kit, part number PS12709966. If you need help placing an order for it, please feel free to give us a call!

$325.98

LED Encoder Board Kit

Was this helpful?

Michael - For model number CHS900P4M1W2

November 22, 2025

Our GE Cafe Induction Range periodically stops working. Burners shut off, front panel stops responding. Sometimes if we shut off the power and turn it on again, it comes back on. Sometimes if we wait a while (without turning off the power), it comes back on. We have had occasions that nothing works. One time it stopped working right before we went on vacation. We left and went away for a week. When we came back, it started working again. We had a repair man come out at one time, and he said the induction unit and front control encoders need to be replaced ($$$). Subsequently the range worked flawlessly for several months. My wife experienced a failure recently and thought to cool down the stove top glass with ice. (I'd try genuflecting if it would help!) It seemed to work, and worked when the stove failed again. The other night the stove stopped working again and would not come back on (even using my wife's cooling technique). Do you have any recommendations?

Hi Michael, thank you for reaching out. Based on the description you have provided, we would suggest checking the terminal block, part number PS953027. You may need to replace it to fix the issue. We hope this solves your problem!

$64.77

Terminal Block Kit

Was this helpful?

Common Symptoms of the CHS900P4M1W2

How this model fails, and the parts that fix it.

Little to no heat when baking

Fixed by
these parts

Show All

Oven not heating evenly

Element will not heat

Little to no heat when broiling

Fixed by
these parts

Show All

Door won’t open or close

Fixed by
these parts

Show All

Videos related to models starting with CHS900P4M1W2

Watch our pros, then fix it yourself.

Replacing the Temperature Sensor

Replacing the Oven Light Housing

Replacing the Range Leg Leveler

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Oven would go in to a F2 Error

148 of 226 people found this instruction helpful.

Peter from stamford, CT
Really Easy
15 - 30 mins
Nutdriver

Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.

Was this helpful?

terminal block melted

56 of 77 people found this instruction helpful.

jonathan from willow springs, IL
Easy
Less than 15 mins
Nutdriver, Screw drivers

The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. U ... Read more

Read less

Was this helpful?

Oven wouldn't preheat above 300 degrees

54 of 95 people found this instruction helpful.

Gerald from Cape Canaveral, FL
Really Easy
15 - 30 mins
Nutdriver

Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great.

Was this helpful?