My Orders
CGS750P4M2W2 General Electric Range - Overview
Diagrams for CGS750P4M2W2
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$30.53
In Stock
Temperature Sensor
Part #WB21X22134
The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature inside your oven while it is on and send the temperature back up to the electronic control, which adjusts as necessary. If your oven is havi...Read moreng difficulty achieving warmer temperatures and/or keeping warmer temperatures up, you may want to test your temperature sensor. Before you make this repair remember to unplug your range from the power source, and turn off the gas shut off valve.
Read less
$17.16
In Stock
Burner Grate Foot
Part #WB02X24790
This burner grate foot, also known as a bumper, is an authentic OEM replacement part for your range. It is a small black rubber component that acts as a buffer between the metal grate and the surface of the cooktops to prevent scratches and damage to the cooktop. It also stabilizes the burner grate and prevents it from shifting or sliding...Read more, which reduces the risk of accidents or spills. These small components can easily fall and become lost while cleaning or wear down over time. Inspect each of the feet and ensure that you order the correct amount for your range. Each burner grate foot is sold separately.
Read less
$39.42
In Stock
Burner Cap - Black - Medium - 9500 BTU
Part #WB29K10023
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part that will replace it. This is an OEM part sourced directly from the manufacturer and is sold individually.
$49.60
In Stock
Burner Cap - 15K
Part #WB28K10222
This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in color and is sold individually. It is a little more than 4 inches in diameter. To replace the burner cap, simply remove the damaged cap, and r...Read moreeplace it with the new one. No tools are required for this repair. This is an OEM part from the manufacturer.
Read less
$38.26
In Stock
Burner Cap
Part #WB29K10024
This is a burner cap for your gas range. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is the part that will replace it. The cap is black in color and about 3 and a half inches in diameter. This is a quality OEM part sourced directly from the manufacturer. This cap is sold individually.
$16.05
In Stock
Door Handle Fastener
Part #WR01X11007
This is a door handle fastener to secure the handle to your refrigerator drawer. It is also known and a mounting bolt or screw. It is approximately 1 inch in total length, and is made of metal.
$39.95
In Stock
Oven Light Housing
Part #WB08T10002
The light housing is also known as a lamp holder and is a part for the oven in your range. The function of this piece is to hold the bulb that will light up the inside of your oven. As per the manufacturer instructions, if your bulb has burnt out you must buy the bulb for this part locally. This light housing is roughly five inches high, ...Read morewith an outside diameter of roughly four inches by four inches. To install this part, you will need a Phillips screwdriver, a nut driver, and a pair of pliers.
Read less
$16.05
In Stock
$19.49
In Stock
Range Surface Burner Cap, Small
Part #WB16X28654
Proper burner performance depends on a cap that matches the burner head and lies completely flat. Cracks, damaged mounting feet, or heavy buildup can cause poor ignition and an uneven flame. Inspect the burner head, ports, and igniter before ordering a replacement. Match the caps size, shape, and color to the full appliance model and burn...Read moreer location. Allow every surface to cool before lifting the old cap, do not force the replacement into place, and confirm that the flame burns evenly after installation.
Read less
$17.28
In Stock
$16.05
In Stock
$55.22
In Stock
BURNER
Part #WB16X24722
Irregular flames or poor ignition can result from damage or buildup in the surface burner base. The base supports the burner cap, routes gas to the flame ports, and helps keep the flame pattern balanced. First remove loose debris, make sure the cap sits flat, and check the igniter for cracks or misalignment. Match the replacement to the r...Read moreanges full model number, burner size, and position. Shut off both gas and electrical power before removal. Reassemble without bending the igniter or changing any gas components, then verify that the flame is even and mostly blue.
Read less
Common Symptoms of the CGS750P4M2W2
How this model fails, and the parts that fix it.
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
Show All
Door won’t open or close
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More