EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

CFEB27S2FS1 Frigidaire Wall Oven - Overview

Diagrams for CFEB27S2FS1

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb – Part Number: 316538904
$27.45
In Stock
Light Bulb
★★★★★
★★★★★
(13)
Part #316538904
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If the existing bulb is broken in the socket, disconnect the power to the refrigerator and use a pair of needle nose pliers to grip the internal fragments of the bulb to unscrew. Replace with the new bulb and reconnect the power to the refrigerator. These bulbs are sold individually and are a commonly replaced part; consider ordering a spare.
Temperature Sensor – Part Number: 316217002
$62.65
In Stock
Temperature Sensor
★★★★★
★★★★★
(22)
Part #316217002
The oven temperature sensor for your range may also be called a probe. The quick connect on this part may differ than your original piece. If the temperature sensor does not fit you will have to cut off the quick connect, and then wire together with porcelain wire nuts. The function of the oven temperature sensor is to measure the temperature in the oven and signal the other heating components. Before you begin this repair make sure to disconnect the power to the range. The tools required for this installation include a number two Phillips screwdriver or a number two square head screwdriver, and maybe a pair of wire strippers and crimpers.
Main Terminal Block Kit – Part Number: 5304409888
$40.60
In Stock
Main Terminal Block Kit
★★★★★
★★★★★
(14)
Part #5304409888
Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches the power cord to the inner wiring of your appliance. If the terminal block is faulty, your appliance will not get the power it needs to operate properly. When removing the old block pay close attention to the wire placement, this will make installing your new part much easier. If you notice any of the wires or wire terminals are corroded or damaged they will also need to be replaced.
LENS – Part Number: 5304524341
$26.37
In Stock
LENS
★★★★★
★★★★★
(15)
Part #5304524341
The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to remove the existing light bulb lens. Be sure to remove all broken glass, if applicable, before installing the new lens. It is recommended to check the state of the light bulb while the lens is off. This part is made of glass. The lens is a genuine Frigidaire part, sourced directly from the manufacturer, and is sold individually.
Mounting Screw – Part Number: 5304453707
$25.25
In Stock
Mounting Screw
Part #5304453707
Oven Light Socket – Part Number: 316116400
$63.59
In Stock
Oven Light Socket
★★★★★
★★★★★
(5)
Part #316116400
The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to remove the back panel to access the socket for the repair. You will also need to remove the current light bulb and the light lens cover so that the old socket can be removed. As you will be working around electrical circuits for this repair, be sure to disconnect the power source from the oven before you begin work on the oven.
SWITCH ROCKER – Part Number: 5304527842
$20.68
In Stock
SWITCH ROCKER
★★★★★
★★★★★
(1)
Part #5304527842
Are you struggling with your Samsung range? Our genuine Samsung Touchpad Control Panel Assembly is here to help. We understand that a malfunctioning range disrupts your meals and adds stress to your day. This replacement part is like giving your appliance a life-saving transplant that returns it back to top-shape. This is no cheap knock-off - it's an authentic, high-grade Samsung part. Designed meticulously by Samsung, it's been thoroughly tested for both quality and safety, so you can trust it to deliver a stellar, reliable performance. What this assembly does is simple, but very important. It's the brain of your range?controlling and displaying the settings. With it, you'll smoothly set your required cooking time and temperature, returning the joy and convenience to your meal preparation. Before installing it, make sure your range's power and gas supply are switched off and always remember to wear protective gloves to ensure your safety. If your Samsung range needs a bit of TLC, then our Touchpad Control Panel Assembly is exactly what you need. It's your key to reactivating that seamless efficiency you miss. Let's get your range running like new again.
Bake Element - 2300W – Part Number: 318255100
$146.25
In Stock
Bake Element - 2300W
★★★★★
★★★★★
(3)
Part #318255100
This bake element is found on the bottom of the oven.
Broil Element – Part Number: 318255606
$162.48
In Stock
Broil Element
★★★★★
★★★★★
(1)
Part #318255606
This broil element delivers powerful radiant heat for broiling, searing, and browning food inside your oven. Positioned at the top of the oven cavity, it operates at 3400 watts and 240 volts to ensure fast, even heating during broil cycles. A genuine OEM replacement, this element is ideal for restoring performance when your oven produces no heat, insufficient heat, or uneven heat while broiling. Installation is simple—disconnect power, remove the old element, and secure the new one in place for reliable operation.
Light Lens Retainer Clip – Part Number: 5304400195
No Longer Available
Light Lens Retainer Clip
Part #5304400195
This is a light lens retainer clip and it is used in conjunction with the oven on your range. This retainer clip secures the light lens to the oven cavity. The part is made entirely of metal, and it is thin and bow-shaped. The retainer clip is roughly 3.5 inches long and 2 inches wide. The most common reason for needing to replace this part is if your current one is damaged or missing. This clip is a genuine OEM piece sourced directly from the manufacturer.
Rack – Part Number: 318345200
No Longer Available
Rack
Part #318345200
Range Support – Part Number: 5304403015
$42.82
Special Order
Range Support
Part #5304403015

Manuals & Care Guides for CFEB27S2FS1

Click to download

Common Symptoms of the CFEB27S2FS1

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven not heating to desired temperature
155 of 244 people found this instruction helpful.
  • Dan from Bellevue, ID
  • Easy
  • 15 - 30 mins
  • Screw drivers
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
Was this helpful?
Thank you for voting!
Cord was not tightened enough by delivery crew.
109 of 174 people found this instruction helpful.
  • Timothy from Spring Valley, AL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools neede d are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Was this helpful?
Thank you for voting!
Oven light receptacle broken - bulb base broke off
69 of 116 people found this instruction helpful.
  • Paul from Spokane Valley, WA
  • Easy
  • 30 - 60 mins
  • Screw drivers
Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven, and the new one snapped in easily from inside the oven as well. Replaced wiring, installed new bulb, restored power & tested. Replaced back cover. Good time to vacuum under/behind where the oven usually lives before sliding it back to the wall.
Was this helpful?
Thank you for voting!