My Orders
CDT888P4V1W2 General Electric Dishwasher - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$13.92
In Stock
Dishwasher Lower Rack Roller
Part #WD12X26146
This lower rack roller is a genuine replacement component designed to support the smooth and stable movement of the dishwasher’s bottom rack. Measuring approximately 1.5 inches in diameter and finished in charcoal gray, it ensures consistent rack alignment and ease of use during loading and unloading. For optimal performance, it is recomm...Read moreended to replace all four rollers simultaneously. Installation is straightforward and requires no special tools, though wearing protective gloves is advised. Sold individually.
Read less
$34.74
In Stock
RACK CARRIER AND ROLLER KIT
Part #WD01X35298
- Includes: 4 brackets, 4 roller wheel brackets, and 8 wheels part # WD12X26146
Dishwasher Lower Dishrack Carrier and Roller Kit (Set of 4). This kit will replace all four one piece roller carriers with two piece roller carriers. Match each carrier and cover designated for the side being replaced and replace all four carriers
$16.05
In Stock
Screw 8-16 hxw 1/2 Stainless Steel
Part #WD02X10067
This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, ensuring stable and effective spray arm performance.
Sold individually, this durable metal fastener requires a nutdriver for proper installation.
$30.67
Special Order
GASKET TUB Stainless Steel
Part #WD08X22095
Stop leaks and keep your dishwasher running smoothly with this tub gasket replacement. It forms a tight seal between the door and tub, so water stays inside during every wash cycle. Made from strong, flexible rubber, it’s built to last and easy to install—just remove the old gasket, clean the channel, and press the new one in. If you’ve n...Read moreoticed puddles on the floor or dishes that aren’t drying well, this simple fix can make a big difference.
Read less
$14.94
In Stock
$16.05
In Stock
Latch Striker
Part #WD13X10071
This dishwasher latch strike is a manufacturer-approved replacement part for your appliance. The latch strike is an important component in your dishwasher door assembly, and adds an extra layer of security in keeping the door closed. This part may become damaged if the door has been opened during a wash cycle. It can also wear out over ti...Read moreme. It is fairly easy to replace, simply pop out the old door strike using a screwdriver for leverage, and insert the new one.
Read less
$16.05
On Order
Dishwasher Clip Lower Rack
Part #WD12X20171
Upgrade your GE dishwasher with this essential Lower Rack Clip. This durable tine row clip holds the tine row in its proper position, ensuring smooth and efficient operation. Specifically designed for GE appliances, it offers a perfect fit, promising long-lasting performance and reliability. Though the fitting process is straightforward, ...Read moreit is recommended to wear work gloves to protect your hands during the installation. Enhance the functionality and lifespan of your appliance with this GE Lower Rack Clip. Secure your dishwasher's capabilities today with this high-quality part.
Read less
$16.05
On Order
$17.18
In Stock
FLOATING SEAL ASM
Part #WD08X27458
PLEASE NOTE: THIS PART IS INCLUDED IN THE WASH PUMP SERVICE KIT PART # WD19X25700
$38.45
In Stock
PRESSURE SENSOR ASM
Part #WD21X25468
This is a manufacturer-built pressure sensor for dishwashers. This pressure sensor, also known as a pressure switch, is designed to monitor the water pressure, communicate with the control board of the dishwasher, and accurately calculate the necessary amount of water for the washing cycle. If this pressure sensor is bad or not working pr...Read moreoperly, it will cause over and underfilling of your dishwasher, as well as excessive noise while in operation. To replace this pressure sensor, you will need a screwdriver and wrench to gain access and remove this part, and further disassembly of your dishwasher may be required. This sensor is sold individually and does not come with any other parts.
Read less
$16.23
In Stock
Refrigerator Set Screw
Part #WR01X20424
The GE Set Screw is a critical refrigerator component, designed with meticulous precision to adhere to the strict GE standards. This essential item contributes to the smooth and efficient operation of your refrigerator. Designed for easy installation, always make sure to follow all safety practices to ensure a successful setup. Remember, ...Read morethe longevity of your appliance is only as durable as its smallest part - invest in GE quality to experience superior performance and peace of mind. Embrace the reliability of the GE Set Screw and rest assured you've chosen the best for your appliance needs. Enjoy a fresh way to enhance and preserve the longevity of your beloved GE refrigerator.
Read less
$38.08
In Stock
DOOR LATCH
Part #WD01X29878
This GE dishwasher door latch ensures your unit operates safely and effectively. Strategically designed, it fits on the top of your dishwasher tub, securing the door and maintaining the unit's cycle integrity by preventing unwanted openings when the dishwasher is running. Prior to installing, please ensure your dishwasher is disconnected ...Read morefrom its power source for safety purposes. Don't forget to wear work gloves during the installation process to protect your hands. This sturdy and reliable door latch is a crucial component to keep your dishwasher performing optimally and fulfill your kitchen needs. Please remember, this product should only be installed in GE dishwashers.
Read less
Common Symptoms of the CDT888P4V1W2
How this model fails, and the parts that fix it.
Leaking
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Roller carrier got melted by heat coil
13 of 21 people
found this instruction helpful.
Replaced bad roller carrier with a new one.
Other Parts Used:
Was this helpful?
Thank you for voting!