My Orders
CDT858P3V3D1 General Electric Dishwasher - Overview
Diagrams for CDT858P3V3D1
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$13.92
In Stock
Dishwasher Lower Rack Roller
Part #WD12X26146
This lower rack roller is a genuine replacement component designed to support the smooth and stable movement of the dishwasher’s bottom rack. Measuring approximately 1.5 inches in diameter and finished in charcoal gray, it ensures consistent rack alignment and ease of use during loading and unloading. For optimal performance, it is recomm...Read moreended to replace all four rollers simultaneously. Installation is straightforward and requires no special tools, though wearing protective gloves is advised. Sold individually.
Read less
$34.74
In Stock
RACK CARRIER AND ROLLER KIT
Part #WD01X35298
- Includes: 4 brackets, 4 roller wheel brackets, and 8 wheels part # WD12X26146
Dishwasher Lower Dishrack Carrier and Roller Kit (Set of 4). This kit will replace all four one piece roller carriers with two piece roller carriers. Match each carrier and cover designated for the side being replaced and replace all four carriers
$16.05
In Stock
Screw 8-16 hxw 1/2 Stainless Steel
Part #WD02X10067
This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, ensuring stable and effective spray arm performance.
Sold individually, this durable metal fastener requires a nutdriver for proper installation.
$30.67
Special Order
GASKET TUB Stainless Steel
Part #WD08X22095
Stop leaks and keep your dishwasher running smoothly with this tub gasket replacement. It forms a tight seal between the door and tub, so water stays inside during every wash cycle. Made from strong, flexible rubber, it’s built to last and easy to install—just remove the old gasket, clean the channel, and press the new one in. If you’ve n...Read moreoticed puddles on the floor or dishes that aren’t drying well, this simple fix can make a big difference.
Read less
$14.94
In Stock
$16.05
In Stock
Latch Striker
Part #WD13X10071
This dishwasher latch strike is a manufacturer-approved replacement part for your appliance. The latch strike is an important component in your dishwasher door assembly, and adds an extra layer of security in keeping the door closed. This part may become damaged if the door has been opened during a wash cycle. It can also wear out over ti...Read moreme. It is fairly easy to replace, simply pop out the old door strike using a screwdriver for leverage, and insert the new one.
Read less
$16.05
On Order
Dishwasher Clip Lower Rack
Part #WD12X20171
Upgrade your GE dishwasher with this essential Lower Rack Clip. This durable tine row clip holds the tine row in its proper position, ensuring smooth and efficient operation. Specifically designed for GE appliances, it offers a perfect fit, promising long-lasting performance and reliability. Though the fitting process is straightforward, ...Read moreit is recommended to wear work gloves to protect your hands during the installation. Enhance the functionality and lifespan of your appliance with this GE Lower Rack Clip. Secure your dishwasher's capabilities today with this high-quality part.
Read less
$103.63
In Stock
LOWER RACK
Part #WD28X34743
This lower dishrack assembly is designed to securely hold dishes in place during the wash cycle of select GE dishwashers. Engineered for optimal water flow and detergent distribution, it ensures thorough cleaning by maintaining proper positioning of plates, bowls, and other items. The assembly includes integrated wheels for smooth gliding...Read more and is compatible with a wide range of GE models, including those sold under the Kenmore name. Replacement may be necessary if the rack is warped, broken, or if tines and brackets have snapped off. Damaged rollers can also hinder rack movement, indicating the need for a new assembly. Installation is straightforward and can be completed with basic tools, though consulting your appliance’s manual is recommended for model-specific guidance.
Read less
$16.05
On Order
$17.18
In Stock
FLOATING SEAL ASM
Part #WD08X27458
PLEASE NOTE: THIS PART IS INCLUDED IN THE WASH PUMP SERVICE KIT PART # WD19X25700
$52.75
On Order
HEATING ELEMENT
Part #WD05X35098
This dishwasher heating element is designed to efficiently heat water during the wash cycle and assist in drying dishes at the end. Constructed from durable metal and finished in black, it is positioned at the bottom of the dishwasher tub. Measuring approximately 17-1/4 inches by 16-5/8 inches by 3 inches, it ensures optimal cleaning perf...Read moreormance by raising water temperature to effectively remove food residues. During the drying phase, it helps evaporate moisture from dish surfaces, reducing water spots and enhancing overall drying results. Installation involves accessing the bottom of the tub and securing the element in place, typically requiring basic tools and safety precautions such as disconnecting power before beginning.
Read less
$38.45
In Stock
PRESSURE SENSOR ASM
Part #WD21X25468
This is a manufacturer-built pressure sensor for dishwashers. This pressure sensor, also known as a pressure switch, is designed to monitor the water pressure, communicate with the control board of the dishwasher, and accurately calculate the necessary amount of water for the washing cycle. If this pressure sensor is bad or not working pr...Read moreoperly, it will cause over and underfilling of your dishwasher, as well as excessive noise while in operation. To replace this pressure sensor, you will need a screwdriver and wrench to gain access and remove this part, and further disassembly of your dishwasher may be required. This sensor is sold individually and does not come with any other parts.
Read less
Common Symptoms of the CDT858P3V3D1
How this model fails, and the parts that fix it.
Leaking
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Roller carrier got melted by heat coil
13 of 21 people
found this instruction helpful.
Replaced bad roller carrier with a new one.
Other Parts Used:
Was this helpful?
Thank you for voting!