CD48CD (312000000-312999999) Exmark Lawn Mower - Overview

This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut...Read more has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

The Lock Nut is used to secure and lock parts in place. This is a gold, metal, individually sold part which can be installed with a wrench set, and socket set, and attaches onto various locations on a variety of equipment. If broken, damaged or worn, the part may be loose, and there may also be physical damage to the nut, at which time it...Read more should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

The flat washer is an OEM replacement part that provides a wide surface area to distribute the load of a bolt or a screw when it is installed. This protects the part being fastened from getting damaged or deformed and provides a more secure fit for the bolt/screw. This flat washer is made of steel and has a diameter of 0.375 inches and a ...Read morethickness of approximately 0.063 inches. To replace the flat washer, first unthread the bolt/screw before using a flathead screwdriver to carefully pry it off. Clean the area, place the new flat washer in position, and thread the bolt/screw back on. Sold individually.

It is made of metal and is sold individually. The screw connects to the idler pulley. A socket set might be needed during the installation process. Over time this part may become stripped and will need to be replaced. This part is an OEM from Toro and Lawn Boy for use in snowthrowers, tillers, blower-vacuums, and lawn tractors.

This replacement hardware is sourced from original equipment manufacturer for use with Toro snowthrowers. It is standard hardware which has multiple applications, please refer to appropriate diagrams for correct location and use of this locknut. This part is made from durable metal and it is sold individually.

This authentic manufacturer-sourced component is made for use with snowthrowers. The lock nut is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your specific model for the correct location and application of this part. Note, the lock nut is designed to resist loosening wh...Read moreen it is properly secured. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal flat washer is used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This item is used with several different models of snowthrowers. It is recommended to review your...Read more model\\\'s part diagram to confirm the washer\\\'s compatibility and usage. The flat washer is priced individually.

This lock nut is used to secure threaded fasteners, to prevent them from loosening and falling off during use. It is sourced from the original manufacturer for use in various lawn and outdoor equipment. The nut has a nylon insert on one end which holds the fastener and locks the nut in position. It comes in a hexagonal shape, which makes ...Read moreit easier to grip, and ensures better stability. It is normal for a lock nut to corrode, crack or wear down over time. You will likely notice increased vibration, noise, and instability from your equipment when the nut is no longer able to securely hold the fastener. To remove and replace a lock nut, nut use a wrench or socket. Regularly inspecting and replacing the lock nuts in your equipment is important in maintaining the longevity of the equipment. Each nut is sold individually.

This item is priced individually. The flat washer goes next to the hub cap and is made of metal. During the installation process, a wrench might be needed to replace this part. It will need to be replaced if it bends or breaks. This is a genuine Toro part sourced directly from the manufacturer for use in lawn mowers and lawn tractors.

This Belleville washer, also called a disc spring or conical spring washer, is a component in your lawn equipment that distributes load and keeps tension in check in areas where controlled compression is needed such as in suspension systems and blade assemblies. If the washer is damaged, showing signs of deformation, cracks, or warping, y...Read moreour machine will have no cushioning between their parts and your machine will wear out faster. Use a pair of pliers or a flathead screwdriver to remove a washer from your machine. If it is stubborn, apply some penetrating oil to help loosen it. Remember to consult your user guide to determine how many washers you need and where they are in your machine. Since these washers are sold individually, it is strongly recommended that you replace all your washers in one go as they wear out at the same rate.