CAP2040P-OF Bostitch Compressor - Overview

This is a genuine Bostitch replacement part, it is sold individually. The purpose of the Valve Plate is to allow into the cylinder....Read morento the air tank. Overtime the reeds will become worn and the Valve Plate will need to be replaced. This is also a good time to replace the head gaskets.

Read less

This is a genuine Bostitch replacement part, it is sold individually. The purpose of the AB-9051116 Pressure Reducer is to control the amount of air pressure coming out of the compressor tank. This is helpful when inflating items to specified pressure. Also some pneumatic tools use different air pressure specifications to make them operate properly.

Genuine Bostitch replacement part, this item is sold individually. There are two of these gaskets used on the compressor models shown below. They are placed in between the AB-A640050 Valve Plate Assembly. The purpose of the gaskets is to create a seal so air will not leak out. Over time these will wear and have to be replaced. This would be a good time to inspect the Valve plate Assembly for wear also.

This is a genuine manufacturer sourced replacement part designed for use with Bostitch air compressors. Reed valves are commonly used in two-stroke engines, where they control the fuel-air mixture admitted to the cylinder. As the piston rises in the cylinder a vacuum is created in the crankcase beneath the piston. This part is made out of metal and it is sold individually.

This is a genuine OEM sourced replacement part used on Bostitch air compressors. The press.sw.4W 3/8in valve ul is composed of intricate metal and plastic parts. The pressure switch component is fastened onto the compressor tank, and its cord to the pump assembly. This part is sold individually. An adjustable wrench is needed in making the replacement.

This genuine item is supplied directly from the original equipment manufacturer for use with Bostitch air compressors. The drain tap attaches to the crankshaft and is made out of metal. If this item breaks it will need to be replaced. A wrench may be needed during the installation of this part which is sold individually.

This is a genuine manufacturer-sourced component which is specially designed for use with Bostitch air compressors. The power cord is hardwired to the tool in order to supply power from a standard U.S. outlet. If the cord is damaged it is important to replace it before continuing to use the tool. It provides an identical replacement for a...Read more missing or a faulty component that was installed on a new unit. Please make sure to check the owners manual and the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality rubber insulated cord is sold individually.

This non return valve is available as an individual replacement part. It connects the air receiver to the pump assembly. The valve is made of metal and lets air flow into the tank, but not back out. A wrench may be needed to replace this part. This is a genuine Bostitch replacement part for compressors.