CAP2000P-OF (Type 0) Bostitch Compressor - Overview

This is a high-quality component which is sourced directly from the original equipment manufacturer for use with Bostitch air compressors. The valve blade is placed in the cylinder head assembly in the valve plates to control the flow of air into and out of the cylinder. Over time it may wear out or get damaged eventually requiring a repl...Read moreacement to keep your equipment performing like new. You may require a screwdriver and a wrench set to perform this repair. Note, the valve blade is sold as an individual part. Check the diagrams for your model to ensure the correct replacement procedure.

It is a genuine OEM supplied replacement part is specially designed for use with Bostitch air compressors. The piston is a central component of a two-cycle engine. It both provides compression within the engine, as well as transfers the energy from combustion to the crankshaft which creates rotation. The most common reason for replacing t...Read morehe piston assembly is worn or damaged piston rings. It is made from high-quality metal and it is sold individually.

This is a genuine replacement part that has been sourced from the original manufacturer and is intended to be used with air compressors. The metal coupling attaches to the manifold assembly. This item is used to link the air hose with the quick connect coupling. This item is sold as an individual replacement part.

This fan is a genuine Bostitch replacement part. It is commonly used in air compressors. This fan keeps the motor cool to prevent overheating. It should be replaced if any of the fins are broken or chipped. Be sure the fan is free of debris to allow air in. This part is made of plastic and sold individually. A screwdriver is needed to replace it.

This is a genuine manufacturer-sourced component which is specially designed for use with Bostitch air compressors. The power cord is hardwired to the tool in order to supply power from a standard U.S. outlet. If the cord is damaged it is important to replace it before continuing to use the tool. It provides an identical replacement for a...Read more missing or a faulty component that was installed on a new unit. Please make sure to check the owners manual and the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality rubber insulated cord is sold individually.

The pressure gauge attaches to the pressure reducer and displays the amount of air pressure in the tank. It is made of plastic and metal and is sold individually. It is a genuine OEM sourced part which is specifically designed for use with Bostitch compressors. If the gauge starts to leak air it will need to be replaced. During installation, a wrench may be needed to replace this part.

This pressure switch is a specially designed replacement part made for use with Bostitch air compressors. The purpose of a pressure switch is to control when compressor should start or stop building up pressure. Commonly if your air compressor is not turning off and on at the specified pressure. Replacing pressure switch, usually should r...Read moreesolve the issue. Please note to complete this repair you would need a set of wrenches, nut driver set and a thread-sealing tape. • First make sure to unplug air compressor • Drain the air tank • Remove the tank pressure gauge • Disconnect the pressure switch tube • Remove the pressure regulator assembly • Disconnect the wires • Remove the safety valve • Remove the old pressure switch • Install the new one • Reassemble in reverse order • Test the air compressor

This is a genuine Bostitch replacement part, it is sold individually. The purpose of the AB-9051116 Pressure Reducer is to control the amount of air pressure coming out of the compressor tank. This is helpful when inflating items to specified pressure. Also some pneumatic tools use different air pressure specifications to make them operate properly.

This is an authentic replacement part manufactured for use with Bostitch air compressors. The special cover is used to house and protect the pump, motor, and regulator assembly. This semiplastic cover assembly is sold as an individual replacement part, please note the other half of the cover is available separately. Recommended Parts • Semiplastic Cover Ul, part number: AB-9038514