C7550 (Type 2) Porter Cable Compressor - Overview

Frequently referred to as a Drain Plug, this Drain Valve is used to drain any condensation that has collected inside the tank to prevent the tank from rusting. It is not part of a kit or assembly, is sold individually, made of brass, is gold, and will be found at the bottom of the air tank. This part will need to be replaced when it is ...Read moreno longer able to provide a proper seal, or if it is visibly worn or damaged. You will need a wrench to complete this repair. Customers rate this repair as Easy.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with air compressors. This is an identical replacement for a missing or a faulty cover for the pressure switch, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. It i...Read mores a high-quality part which is made of durable plastic and is sold individually, keep in mind it includes the plastic cover with a red knob. Note, the switch itself is sold separately.

Thread 18 TPI

It is an OEM component which is designed for use with air compressors. This special nut sleeve assembly secures the pressure relief tube to the pressure switch. It is a high-quality replacement for a damaged or a missing hardware that was installed on a new unit. One durable metal nut sleeve assembly is included. A wrench will be needed t...Read moreo perform this repair. Check the appropriate diagrams for your model to ensure the proper replacement procedure. Make sure to drain the air before starting this repair.

This replacement screw is a genuine OEM sourced item commonly utilized on air compressors and pressure washers. It is a standard hardware which has multiple applications depending on the unit. Please make sure to check diagrams of your model for the correct location and used of this screw. This part is made from durable metal and it is sold individually. You will need a wrench to install or remove this hardware.

The pressure switch tells your compressor when to start and stop building up the pressure. This is an authentic manufacturer supplied replacement part that is specially designed for Black and Decker, Porter Cable and DeVilbiss air compressors. Common symptoms of a faulty pressure switch include a motor that continues to run regardless of ...Read morepressure until the safety valve opens or a compressor that simply will not turn on at all. Please note this part is sold individually, to replace it you will need: screwdriver, wrench set, pliers and thread sealing tape.

This item has been OEM sourced to ensure a high level of quality. The gauge is intended to be used with air compressors from DeWalt. This part attaches to the regulator manifold and is used to indicate the air PSI within the tank. This item will require a torx driver set and a wrench set to install. The gauge is sold as an individual replacement part.