My Orders
C5510 Porter Cable Compressor - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$7.31
Special Order
DRAIN VALVE
Part #N286039
Frequently referred to as a Drain Plug, this Drain Valve is used to drain any condensation that has collected inside the tank to prevent the tank from rusting. It is not part of a kit or assembly, is sold individually, made of brass, is gold, and will be found at the bottom of the air tank.
This part will need to be replaced when it is ...Read moreno longer able to provide a proper seal, or if it is visibly worn or damaged. You will need a wrench to complete this repair.
Customers rate this repair as Easy.
Read less
No Longer Available
ASSY CORD POWER ST
Part #SUDL-413-2
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with air compressors. The three wire cord is encased in a durable jacket and includes terminals at the end of the wires. The cord is used to relay electricity from the outlet to the switch assembly. This item is available as an individual replacement part.
$6.40
In Stock
FILTER FELT
Part #265-17
This is a genuine OEM sourced replacement part used on Campbell Hausfeld air compressors. Its purpose is to filter out dust and debris from contaminating the engine. This filter is made out of felt material and it is sold individually. To replace this you would need a wrench or a screwdriver to remove the air cleaner cover.
$60.40
In Stock
VALVE CHECK 1/2NPT X
Part #A19715
This is an OEM part sourced directly from the manufacturer. The check valve is designed for use in Craftsman air compressors. This part is made of metal, and is placed in the tank assembly to control the flow of air through the tube. You will require a wrench when replacing this part. This item is sold individually.
$10.70
In Stock
Valve
Part #D20114
This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure is met, the safety valve will open to release the extra air pressure. The amount of pressure required to open the safety valve is set by te...Read morension of the spring inside the valve. The spring can wear out, and leave the valve open at a lower pressure than what is set to turn the switch off, and will not allow pressure to build inside the tank. This safety valve has a thread sealant pre-applied, so additional thread sealant is not required, the safety valve is sold individually.
Read less
$8.50
In Stock
Gasket
Part #5140118-80
It is a genuine manufacturer sourced replacement part that is specially designed for Craftsman air compressors. This gasket provides an air-tight seal for the cylinder head assembly. Over time gaskets tend to get compressed, become brittle and crack eventually requiring replacement to maintain peak performance. It is made from durable, high quality composite material and it is sold individually.
No Longer Available
GAUGE 200PSI .125NPT
Part #Z-D27212
The gauge attaches to the pressure switch and is made of plastic and metal. It is an authentic OEM sourced item which is specially produced for use with compressors made by Porter Cable, DeVilbiss, and Black & Decker. This item is available as an individual replacement part. A wrench set may be helpful when replacing this part. This item may stop working and will need to be replaced.
$25.80
Special Order
SCREW .250-20X.875 H
Part #SSF-925
This is a genuine replacement screw which is supplied directly from the original equipment manufacturer for use with Craftsman air compressors. This hex head screw has multiple applications, please make sure to check appropriate diagrams of your model for the correct location and use of this hardware. Note this high-quality metal screw is sold individually.
No Longer Available
WHEEL PNEUMATIC 10IN
Part #D23067
This is a genuine Porter Cable replacement part. The pneumatic wheel is commonly found on compressors and generators. This part is made of a rubber tire and metal hub, and is used to help move the machine. You may require a wrench when replacing this part. This item is sold individually.
$11.87
In Stock
GASKET BASE
Part #265-16-1
This gasket is an OEM part direct from Craftsman for air compressors. This part creates a seal in in the middle of the base and the crankcase. You may need a wrench to replace this part. This gasket is made of durable material and sold individually.
No Longer Available
PLATE RESTRICTOR
Part #CAC-294
This is an Authentic OEM part. The Porter Cable plate restrictor is constructed of high-quality metal, and is compatible with many air compressor devices. This item is secured between the flapper valve and the flapper valve intake within the assembly head pump. The plate restrictor has been designed to manage the air flow for the engine. ...Read moreThis part is sold individually. A wrench is often necessary in making the proper removal and replacement.
Read less
$17.91
In Stock
GASKET VALVE PL THICK ARMST
Part #CAC-1265-2
This is an authentic replacement part that has been sourced from the original manufacturer to be used with air compressors from Porter Cable, Black and Decker, and DeVilbiss. The gasket is used to seal the connection between the cylinder and the valve plate. It is recommended to replace gaskets when servicing the pump assembly to ensure p...Read moreroper seals when the parts are reassembled. This item is sold as an individual replacement part.
Read less
Common Symptoms of the C5510
How this model fails, and the parts that fix it.
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More