BT200K-2 (Type 0) Bostitch Nailer - Overview

This part is an authentic replacement part used in various Bostitch and Porter Cable power tools. An o-ring is a gasket used to create a strong seal between solid pieces. It is a simple yet essential part of a tool. Please note that the proper size o-ring is necessary for proper sealing, and there are often more than one size used per tool. This piece is sold individually.

This compression spring is an OEM direct from Bostitch. The metal spring is compatible with many stapler and nailer tools. This item is fitted within the trigger valve kit of the device. The spring is the mechanism for the trigger to move back in place. Although this part is sold individually, it can also be found in the SEQ6 Kit. A small hammer and a hex key are helpful in the repair.

This authentic OEM sourced component is made for use with Bostitch nailers and staplers. It is a special contact trip conversion kit that can be installed on the tool to fire upon contact with a surface. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of th...Read moreis component. Keep in mind this high-quality kit is made of durable metal and is sold individually.

This is a genuine manufacturer-sourced item that is specially designed for use with Bostitch nailers and staplers. The purpose of this o-ring is to provide a tight seal between connected components, unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality hard...Read moreware is made of durable rubber and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item.

This is an authentic Bostitch replacement part that has been sourced from the original manufacturer to be used with pneumatic nailers and staplers. The gasket is used to seal the connection between the end cap and the fastener's frame. The seal is sold as an individual replacement part. A hex driver is needed to install this item.

This is an original Bostitch replacement part sourced from the original manufacture, and not an aftermarket imitation. This head valve diaphram is manufactured for use with brad nailers & staplers. This special head valve allows exhaust air to pass, it is recommended to replace the head valve if the exhaust is blocked. The head valve can also wear out requiring replacement, the head valve is sold individually.

This is a genuine Bostitch replacement part, it is sold individually. The Contact Foot is attached to end of the Contact Trip to prevent the material that it is being used on from getting marred or dented by the trip assembly. It is a advisable to have one or two extra pads on hand as they do have a tendency to crack and deteriorate over time. And get lost.

It is an authentic OEM sourced part that is made for use with Bostitch nailers and staplers. This is a special item that is utilized to provide a tight seal between connected components. Unfortunately, over time the seal may wear out, get damaged or simply lost eventually requiring a replacement. Keep in mind this high-quality part is mad...Read moree of durable material and is sold individually. Make sure to check the owners manual and the appropriate diagrams of your model for the exact location and application of this hardware.