BM801700 (090079274) Homelite Pressure Washer - Overview

This Turbo Nozzle is compatible with select Ryobi and Homelite pressure washers, to ensure this OEM replacement part fits your pressure washer, please see the "Model Cross Reference List" below. The Turbo Nozzle attaches to the end of the wand and ensures the water comes out in a consistent, high pressured stream. If your Turbo Nozzle is ...Read moreno longer providing as much pressure, no longer rotates, or becomes rusted/damaged, it needs to be replaced. This Turbo Nozzle is approximately 4" long, is black in color, and it sold individually.

This is a genuine OEM replacement part for Homelite and Ryobi pressure washers. The switch is used to turn the machine on and off. This is a complete switch which is located inside of the motor housing. This is made of plastic and metal components and is sold as an individual replacement part.

This is an authentic Ryobi replacement part that has been sourced from the original manufacturer and is intended to be used with pressure washers. The kit includes the connection and tubes necessary to attach a garden hose to the pressure washer's pump assembly. This item is priced as a complete kit.

This is a genuine Ryobi replacement high pressure hose that is supplied directly from original equipment manufacturer. It is specially designed for use with pressure washers. This high pressure hose is made out of rubber/plastic material. It is 25 ft long and it is sold individually. This hose can be used on pumps that produce up to 1700 PSI.

Designed for electric pressure washers, this replacement pressure switch connects to the pump and helps control water pressure during use. It senses pressure changes within the pump system so the machine can operate as intended. A worn or damaged switch may lead to low pressure, uneven performance, or trouble starting the pump. Built with...Read more plastic, rubber, and metal components, the assembly is made to handle regular outdoor cleaning jobs. Pliers and a screwdriver may be needed for installation. Before starting the repair, unplug the pressure washer, turn off the water supply, and squeeze the spray trigger to release trapped pressure.

This o-ring is an OEM direct from Ryobi. Compatible with several pressure washer models, the plastic o-ring helps to secure the pressure switch. This protective part is sold individually. A screwdriver and pliers may be necessary for the replacement.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with pressure washers from Homelite and Ryobi. The grommet fits into the lower motor housing and is used to mount a spray nozzle to the housing. This grommet is sold as an individual replacement part.

This genuine OEM quick connect nozzle is guaranteed to fit the Ryobi pressure washers listed below. This yellow chiseling nozzle has a standard fifteen (15) degree spray width. This water-only tip is recommended for heavy duty pressure washing duties, such as cleaning stubborn stains and grime from hard surfaces. It is one step less power...Read moreful than the red zero degree tip (the most powerful quick change nozzle). Since it is such a commonly used nozzle, a backup could come in handy. Sold individually.

This is a genuine OEM sourced replacement part that has been sourced from the original manufacturer to be used with pressure washers from Homelite and Ryobi. This item fits into the water inlet nut. This part is used to prevent debris from entering the pump assembly. This item is priced as a single part.

This is an OEM part sourced directly from the manufacturer. The hose storage strap is used on a Ryobi pressure washer to hold the coiled up hose when not in use. The storage strap is made of polyester webbing with metal fixtures and a velcro fastening. No tools are required to replace this item. Simply remove the old part and strap the new one on in its place. This part is sold individually.