The air filter keeps dirt, dust, and other airborne particles from getting into your home. Blocked or restricted air filters are the most common cause for window air conditioners to not blow air. If the air filter becomes dirty or clogged, there will be little or no air flow over the evaporator coils. This causes frost to form due to cons...Read moretant cold air and no circulation, resulting in little or no air being circulated into the room. The air filter is positioned in front of the evaporator which is located behind the front grille. Regular replacement or cleaning of the air filter is essential to maintaining the efficiency of the air conditioner.
The control panel cover attaches to the front panel and covers the selection buttons and display components for the room air conditioner. The main function of the cover is to protect the display settings and selection buttons from getting damaged. The cover has clips on both left and right top corners for easy installation. These clips al...Read moreso allow the cover door to open and close with ease. If one or both are broken, the part should be replaced. The panel cover measures 8 inches wide x 8 1/2 inches long, and is gray-beige in color. This control door is a genuine OEM replacement part and replaces discontinued part #W971X10015.
The louver is used to direct the flow of air coming from the air conditioner. The louver is attached to the front grille of the air conditioner. This part is made of plastic, is white in color, and measures approximately 30 inches long and 5 inches wide. To repair this part, all it requires is a screwdriver to screw the new louver into pl...Read moreace. Try and keep this part clean to ensure your air conditioner is running efficiently. This is a genuinely sourced part that comes right from where it was manufactured.
This air conditioner propeller fan blade is used to pull air through the filter and over the cold evaporator coils. The cool air is then re-circulated into the room. If you notice that your air conditioner is not blowing cold air, is making a loud sound, or if there is ice forming over the evaporator coils, check to make sure the propelle...Read morer fan is in working order. If the fan blade is broken, cracked, or badly bent, look to replace the part. However, if the issue is an accumulated dirt or ice buildup, clear the debris or ice and test the unit again.
Need a fix for your Whirlpool washing machine? Our genuine OEM Electronic Control Board is here to help. This key component is the mastermind behind all the main functions of your machine?from filling it up with water, handling the washing cycle, draining dirty water, to managing the spin cycle. Just think of it as the brain that runs you...Read morer washing machine. Ahead of the installation, make sure to disconnect your washing machine from power for safety. And don't forget those gloves to protect your hands. With this part designed especially for a range of Whirlpool models, worry less about compatibility and more about getting your laundry done. Its size and shape may differ, but the one thing remains the same ? it's crafted with precision to get your washing machine running like new again. No matter the model of your Whirlpool, this Electronic Control Board is the missing puzzle piece you've been looking for.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Air filters needed to be replaced.
6 of 9 peoplefound this instruction helpful.
Vern from Charlestown, IN
Really Easy
Less than 15 mins
Take the old filters out and install new filters.Took less than 10 minutes.
Was this helpful?
Thank you for voting!
Shroud broke
5 of 6 peoplefound this instruction helpful.
Ruth from SAINT CHARLES, MO
Really Easy
15 - 30 mins
Screw drivers
Step 1: un-plug unit and remove front cover Step 2: remove the (4) four screws holding the air conditioner unit in the wall and pull the air conditioner unit out of wall (takes 2 people) Step 3: remove screws holding the shroud and the bracket for the fan Step 5: remove screw holding fan blade from motor Step 6:
... Read moreinstall new shroud and screw that holds the shroud to bracket Step 7: reinstall the new shroud and and then reverse the process putting the screws back in place and reinstall the unit back into the wall