The air filter keeps dirt, dust, and other airborne particles from getting into your home. Blocked or restricted air filters are the most common cause for window air conditioners to not blow air. If t...
The control panel cover attaches to the front panel and covers the selection buttons and display components for the room air conditioner. The main function of the cover is to protect the display setti...
The louver is used to direct the flow of air coming from the air conditioner. The louver is attached to the front grille of the air conditioner. This part is made of plastic, is white in color, and me...
This air conditioner propeller fan blade is used to pull air through the filter and over the cold evaporator coils. The cool air is then re-circulated into the room. If you notice that your air condit...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
September 5, 2023
Do these units have a remote that can be programmed to it?
For model number AZ41E12DABW1
Hi Stephanie, thank you for the question. According to our research, your model does not come with a remote control. The temperature control and other settings in your model are done by the auxiliary control set, located behind the room cabinet, below the control panel. We hope this information is useful!
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Step 1: un-plug unit and remove front cover Step 2: remove the (4) four screws holding the air conditioner unit in the wall and pull the air conditioner unit out of wall (takes 2 people) Step 3: remove screws holding the shroud and the bracket for the fan Step 5: remove screw holding fan blade from motor Step 6: install new shroud and screw that holds the shroud to bracket Step 7: reinstall the new shroud and and then reverse the process putting the screws back in place and reinstall the unit back into the wall