AZ38H09DACM2 General Electric Air Conditioner - Overview

The air filter keeps dirt, dust, and other airborne particles from getting into your home. Blocked or restricted air filters are the most common cause for window air conditioners to not blow air. If the air filter becomes dirty or clogged, there will be little or no air flow over the evaporator coils. This causes frost to form due to cons...Read moretant cold air and no circulation, resulting in little or no air being circulated into the room. The air filter is positioned in front of the evaporator which is located behind the front grille. Regular replacement or cleaning of the air filter is essential to maintaining the efficiency of the air conditioner.

The control panel cover attaches to the front panel and covers the selection buttons and display components for the room air conditioner. The main function of the cover is to protect the display settings and selection buttons from getting damaged. The cover has clips on both left and right top corners for easy installation. These clips al...Read moreso allow the cover door to open and close with ease. If one or both are broken, the part should be replaced. The panel cover measures 8 inches wide x 8 1/2 inches long, and is gray-beige in color. This control door is a genuine OEM replacement part and replaces discontinued part #W971X10015.

The louver is used to direct the flow of air coming from the air conditioner. The louver is attached to the front grille of the air conditioner. This part is made of plastic, is white in color, and measures approximately 30 inches long and 5 inches wide. To repair this part, all it requires is a screwdriver to screw the new louver into pl...Read moreace. Try and keep this part clean to ensure your air conditioner is running efficiently. This is a genuinely sourced part that comes right from where it was manufactured.

This knob accepts a D-shaped shaft. Sold individually.

This protector heater, also known as a high limit thermostat, is a genuine OEM part. Its function is to keep the heating coils from getting too hot by providing and automatic shutoff, which is an important safety feature in your appliance. When replacing the high limit thermostat, make sure to first unplug the appliance, and wear work gloves when completing the repair.

This is a protector heater for your room air conditioner. This projector heater is round, it is made of metal and chrome colored, and it is just under two inches in diameter. This part helps protect the heater coils in your AC unit by turning it off if it detects temperatures higher than normal within the heater coil area. You will find this part behind the control panel.

This air conditioner propeller fan blade is used to pull air through the filter and over the cold evaporator coils. The cool air is then re-circulated into the room. If you notice that your air conditioner is not blowing cold air, is making a loud sound, or if there is ice forming over the evaporator coils, check to make sure the propelle...Read morer fan is in working order. If the fan blade is broken, cracked, or badly bent, look to replace the part. However, if the issue is an accumulated dirt or ice buildup, clear the debris or ice and test the unit again.