The air filter keeps dirt, dust, and other airborne particles from getting into your home. A common cause for window air conditioners to not blow air is a restricted air filter. If the air filter beco... No Longer Available
This is an air filter and is used with a room air conditioner. This specific model is for the left side of your appliance and is sold individually. This air filter is beige, and measures about 15 inch... No Longer Available
The louver is used to direct the flow of air coming from the air conditioner. The louver is attached to the front grille of the air conditioner. This part is made of plastic, is white in color, and me... No Longer Available
This is a control knob with clip, used for air conditioners. This type of knob allows you to control the temperature by rotating it. Replace the knob if yours is damaged, broken, or will not rotate co...
This protector heater, also known as a high limit thermostat, is a genuine OEM part. Its function is to keep the heating coils from getting too hot by providing and automatic shutoff, which is an impo...
This air conditioner propeller fan blade is used to pull air through the filter and over the cold evaporator coils. The cool air is then re-circulated into the room. If you notice that your air condit...
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
November 11, 2021
Hello!I have this model and the heat side i not working. it’s getting cold so went to turn to heat auto, the heat popped on, stayed on for a bit then shut down. then i turned it t stop and back to heat auto, came back on and shut off again. now i cannot get the heat to work at all. fan hi and low work and low and hi auto cool work fine too. any ideas?
For model number AZ35H12D3BM1
Hello Amanda, thank you for writing. This sounds very much like an electronic control board issue. The part number is PS281911. However, For more specialized assistance or to speak with someone about this, we would suggest calling a qualified technician or the manufacturer of the unit directly. Good luck with your repair.
The Power Cord has a breaker on the plug. The breaker did not 'trip' during a power surge and fried the board in the plug. it melted. I ordered the replacement plug. Took apart the unit. Unplugged the power cord ends from the main unit. The ground wire (green) is screwed in. The other wires (white and black) are attached via push-on terminals. These are harder to get off and on since there are many and are in a tight space. May want to use some long needle nose pliers to assist. The new cable was attaced. There are two plastic clamps that help screw the cord to the unit. Only porblem was the new cord plugs in upside down so you will need to turn the outlet plug around. Turn off power, unscrew outlet and turn upside down. return power to outlet and plug in to complete.
I called the company that I purchased this product from and they gave me the part number that I needed and said to contact GE. I found you on the website and it was so very easy to order these replacement filters. Thank you for making this so easy.