AM2-SH09-B Mi-T-M Compressor - Overview

This is an OEM part sourced directly from the manufacturer. The breather assembly is commonly found on Mi-T-M air compressors. This part is made of high quality plastic, and is connected to the rear crankcase cover to allow excess air to escape the crankcase, while preventing unfiltered air from flowing back in. No tools are required w...Read morehen replacing this item. Simply remove the old part and screw the new one in its place. This item is sold individually.

It is a genuine component that is supplied by the original manufacturer for use with Mi-T-M air compressors. This decal contains the Mi-T-M logo and sticks into place on the air compressor therefore, no tools are required to install or replace it. This part is made of plastic and is sold individually.

A piloted unloader check valve helps a compressor run continuously without forcing the pump to compress air after the tank reaches its set pressure. It vents pump-side air through the discharge outlet and blocks tank air from returning toward the pump. Hissing at the wrong time, slow pressure buildup, pressure that climbs too high, or har...Read mored starting may point to a valve or control problem. Check for damaged tubing, loose fittings, a blocked muffler, and an accurate gauge first. Use only a replacement with matching ports and pressure settings. Release all stored air, lock out the power source, and have a qualified technician set or adjust operating pressure.

This authentic item is supplied directly from the original equipment manufacturer for use with compressors and generators made by Mi-T-M. The air filter is part of the filter assembly. A set of pliers may be necessary during the installation of this part. It is made out of plastic and metal and will need to be replaced if it breaks or becomes dirty. This item is sold individually.