A piloted unloader check valve helps a compressor run continuously without forcing the pump to compress air after the tank reaches its set pressure. It vents pump-side air through the discharge outlet and blocks tank air from returning toward the pump. Hissing at the wrong time, slow pressure buildup, pressure that climbs too high, or har...Read mored starting may point to a valve or control problem. Check for damaged tubing, loose fittings, a blocked muffler, and an accurate gauge first. Use only a replacement with matching ports and pressure settings. Release all stored air, lock out the power source, and have a qualified technician set or adjust operating pressure.
This authentic item is supplied directly from the original equipment manufacturer for use with compressors and generators made by Mi-T-M. The air filter is part of the filter assembly. A set of pliers may be necessary during the installation of this part. It is made out of plastic and metal and will need to be replaced if it breaks or becomes dirty. This item is sold individually.
This is a genuine OEM part. The petcock is constructed of metal, and is an important component to many air compressor tanks. Fitted onto the tank, this item is designed to drain the excess water. The repair may require a wrench to install, and the petcock is sold individually.
This wheel is a genuine replacement part supplied by Mi-T-M. It is compatible with over 150 models of pressure washers. This wheel allows the operator to maneuver the machine easily by pushing it. This part is made of plastic and rubber. It should be replaced if it is worn or the tire is punctured. It is sold individually.
This is an authentic Mi-T-M manufactured for use with air compressors and pressure washers. The rubber isolator foot is used with the frame of the compressor or washer to reduce vibration between the ground and the frame. This rubber isolator foot is sold as an individual replacement part, please see model diagram for associative parts.