99944200530 Echo Pole Saw - Overview

This is a genuine OEM replacement part, it is sold individually. It is used in various places on the models shown below.. It is mainly use to secure parts such as Guide Bar Covers, Sprocket Guards etc.

This replacement tensioner is specially designed for use with Echo pole pruners/chainsaws. This part is a crucial component of chain tensioning mechanism. If the bar doesn't adjust when you turn the tension screw usually the tensioner pin or the adjustment bolt is worn or damaged. This part is made out of metal and it is sold individually.

This drive sprocket is made of high-quality metal and is designed for use with various makes and models of pruner, pole saw and trimmer. This sprocket is sold as an individual part and features 6 teeth/pins and a 3/8-inch pitch, which correlates to the distance between 3 consecutive rivets divided by two. If the chain for your equipment i...Read mores slipping or if the sprocket is worn down and worsening performance, the sprocket will need to be replaced immediately. Sprockets wear down easily because they are a high wear part, and thus will need to be replaced frequently, so it is recommended that you always have this part on hand since your equipment will not run as required without it.

This clutch washer, also known as a circular washer, is authentic manufacturer replacement part which is positioned on the crankshaft between the clutch drum and the engine. It is a circular metal ring with an outer diameter of 1 inch. The clutch engages with the clutch drum and sprocket to allow the chain to rotate when the engine accele...Read morerates. Over time, the clutch washer can wear out or become damaged due to normal aging, inadequate lubrication, or exposure to excessive heat. If the clutch washer is faulty, the chain will not engage or rotate properly, resulting in a loss of cutting power and poor engine performance. To access the clutch washer first remove the chain cover and bar, and then loosen and remove the clutch assembly. Carefully remove the old clutch washer and position the new one in its place. Ensure that it is properly aligned before reassembling the clutch assembly, chain, and bar.

This adjustment screw is an OEM part direct from Echo. The metal item is compatible with chainsaws and trimmers. This component assists the tensioner with the tightness of the chain to the blade. A screwdriver and a nutdriver are helpful for making the replacement. The adjustment screw is sold individually.

This is a genuine item that is supplied by the original equipment manufacturer for use with Echo attachments. The protective cap attaches to the pipe. A set of pliers might be necessary during the installation of this part. It is made out of rubber and will need to be replaced if it breaks. This item is priced individually.

This OEM metal washer is commonly used on a variety of different small engine/lawn equipment models and is sold individually. This washer is used to help evenly distribute pressure from the securing bolt or screw with the cylinder cover, to reduce any effects of vibration from the engine. If the connection between the securing fastener be...Read morecomes loose, or if you are replacing the fastener itself, it is recommended that you replace this washer as well.

This is a simple adhesive sticker/decal with Echo logo. It is commonly used on handheld lawn and garden equipment such as trimmers and blowers. Please make sure to check appropriate diagrams of your model to check the location for this label. It is an authentic manufacturer approved replacement item which is sold individually.

This is an authentic replacement part that is supplied by the original manufacturer for use with Echo handheld lawn and garden equipment. The retaining ring is commonly used to secure a component on a shaft, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep ...Read morein mind this high-quality item is made of durable metal and is sold individually.

This is a genuine OEM approved replacement part, it is specially designed for use with Echo power pruners. It is utilized to keep the fuel in the tank. It includes a retainer that remains in the tank to keep the fuel cap from being lost or falling on the ground. It is made of high-quality plastic material and it is sold individually.

This is an authentic Echo replacement part sourced for used with power pruners. The plastic cover includes the eyelets for the bolts that secure the bar. The cover sits on the outside of the bar, and covers the drive sprocket, oiler assembly, bar tensioner, and adjustment screw. This cover is sold individually, please see model diagram for additional parts.