99944200475 Echo Edger - Overview

The Cutter Blade (or Cutting blade) is a 7-3/4 inch, silver, metal blade which comes sold in a set of two. They require pliers, and a socket set to install and are rated as "Easy" to install by users. These blades are used for edging level ground sidewalks and driveways. If the part is broken or damaged due to wear from general use, they ...Read morewill become dull and will need to be sharpened or replaced. They attach to the cutting shaft. Refer to your make, model and diagrams to ensure this is the correct part.

The Cotter Pin (or Split Pin) is a 2x22mm silver metal part, sold individually. It is rated as "Easy" to install, and installation will require a set of pliers. It can be attached in various locations on a variety of equipment and is used to secure and lock parts in place. If broken, damaged, or worn down the part it is securing may becom...Read moree loose, and the part should be replaced. If this part is removed for repairs, replace it with a new one. Refer to your make, model, and diagrams to make sure this is the correct part.

This is an original manufacturer approved replacement item commonly used on trimmers, brushcutters and edgers. The purpose of this nut is to secure cutter head assembly to the spindle/shaft of a trimmer. It is a metal nut which is sold individually. Please only use properly sized wrench when securing or removing this nut.

This is a genuine item that is supplied by the original equipment manufacturer for use with Echo attachments. The protective cap attaches to the pipe. A set of pliers might be necessary during the installation of this part. It is made out of rubber and will need to be replaced if it breaks. This item is priced individually.

This is a genuine Echo replacement part that has been sourced from the original manufacturer to be used with trimmers. The stopper is used to support the flexible liner to limit vibration inside the main pipe assembly. The stopper is sold as an individual replacement part, please note two stoppers may be needed.

The Blade Fixture is a silver, metal, individualy sold blade, which attaches at the bottom of the cutting head assembly, being held on by the nut and cotter pin. It is used to secure the blade fixing plate of the trimming tool. Installation is rated as "Easy" and requires a wrench and pliers to complete. If broken or damaged due to genera...Read morel wear, the cutting blade will not be secured, may be loose, or may not be able to stay on, which means you need to replace it. Refer to your make, model, and diagrams to ensure this is the correct part.

This is an authentic replacement part manufactured for use with Echo lawn edgers. The special debris flat is used to reduce the amount of lawn clippings that are thrown by the blade. This debris flap is sold as an individual replacement part, please note the flat plate and screw used to mount the debris flap is available separately.

This is a genuine manufacturer-approved replacement wheel which is specially designed for use with Echo lawn edgers. It is one of the main wheels which supports the unit and allows it to be moved around. This high-quality wheel is made of durable plastic and it is sold individually, please note the hardware is sold separately.

It is a genuine OEM sourced replacement part that is specially made for use with Echo handheld lawn and garden equipment. This screw has multiple applications depending on the model of your unit, please refer to appropriate diagrams for correct location and use of this hardware. It is made from high-quality metal and it is sold individually.

An authentic item that is supplied by original equipment manufacturer for use with Shindaiwa and Echo power equipment. This flange nut is a high quality hardware which has multiple applications depending on your equipment, please make sure to check appropriate diagrams for correct location and use of this item. One durable metal nut is included per order.

This is a genuine manufacturer sourced replacement washer that is designed for use with Shindaiwa and Echo handheld lawn and garden equipment. It helps to distribute the pressure evenly between two connected parts, for proper application please make sure to check appropriate diagrams of your unit. This part is made from durable metal and it is sold individually.

This is a manufacturer-sourced part which is specially designed for use with Echo edgers. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable metal and is sold individually.