This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-o...Read moreut bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.
This light bulb is a 120 volt, 25 watt incandescent appliance light bulb with a small base screw-in that fits in a variety of appliances such as microwaves, refrigerators, freezers, cooktops, or stoves. Its purpose is to light up the appliance when the door is open. This is a genuine OEM part. You may need to replace the light bulb if the...Read more existing bulb is burnt out or broken. This light bulb is sold individually and is a common wear part, it is recommended to order a spare.
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising the integrity of the adhesive. It is white in color, and the tube is approximately 7.5 inches long.
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to ...Read morewear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.
Proper control of an electric burner depends on the infinite switch working correctly. A failed switch may keep the element from heating, prevent it from shutting off, or hold it at one temperature. Check the element and connections before ordering a replacement. Match the switch to the complete range model and burner location because sim...Read moreilar switches may have different ratings. Disconnect power at the breaker, confirm the appliance is not live, and have a qualified technician complete the repair if the wiring is unclear.
This is a genuine replacement part sourced from the original manufacturer for use with power tools. The metal screw is commonly used with several different types of power tools, and the application of the screw can vary based on the model of the power tool. This screw is available as an individual replacement part, please see model diagram for part location and usage.
This is a genuine Porter Cable replacement part, it is sold individually. A Cord Strain Reliever is used on most all power tools. It purpose is to reduce the bending of the cord as it comes out of the housing, which otherwise would cause the cord to crack and wear.
This replacement crossover tube is a high quality item that is sourced from original equipment manufacturer for use with Weber gas grills. The carryover tube is secured between two burner tubes to provide extra support for the burners and carry the gas from one burner to the next. Over time tubes may rust or warp, this would generally wou...Read moreld be caused by a combination of heat and moisture usually if the grill is not cleaned after each use. One durable stainless steel crossover tube is included per order.
This part number matches the current model number 9750
Part #9750
This manufacturer sourced replacement part is designed for use with Abu Garcia fishing reels. It helps to distribute the pressure evenly to ensure a tight seal between connected components. Unfortunately, over time it may wear out and begin to crack eventually requiring a replacement. Please make sure to refer to the appropriate diagrams ...Read moreof your model for the correct location and application of this hardware. Keep in mind this high-quality felt oil retainer is sold individually.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
burnt out bulb
27 of 63 peoplefound this instruction helpful.
THOMAS from STOW, OH
Really Easy
Less than 15 mins
took cover off, installed bulb. lost the owners manual, part select's schematics were very helpful thanks
Was this helpful?
Thank you for voting!
The infinite switch controlling one of the range top burners failed.
12 of 19 peoplefound this instruction helpful.
erik from chester springs, PA
Easy
15 - 30 mins
Screw drivers
1 - Turned off electricity to the cook top. 2 - Removed the range top from the cutout in the counter. 3 - Removed the smooth top by removing the screws around the perimiter of the smooth top. 4 - Removed the screws securing the corner closest to the dead switch. 5 - Removed the screws holding the channel, onto which th
... Read moree infinite switched were attached, to the frame of the cooktop base. 6 - Removed the dead switch by removing the screws that hold it to the channel. 7 - One by one move the wires from the old switch to the new one. 8 - Reversed the process, 6 - 5 - 4 - 3 - 2 - 1, to put the cook top back together.
All in all the part was an exact replacement and the repair went really well.