Models > 96043027500

96043027500 Husqvarna Lawn Tractor - Overview

Sections of the 96043027500

[Viewing 21 of 21]
Keep searches simple, eg. "belt" or "pump".
Washer Head Screw – Part Number: 584953901
Washer Head Screw
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.99
  In Stock
Washer 25/32 x 1-1/4 x 16 Ga. – Part Number: 532121749
Washer 25/32 x 1-1/4 x 16 Ga.
★★★★★
★★★★★
(2)
PartSelect #: PS9008998
Manufacturer #: 532121749
This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending...
$3.99
  In Stock
Washer Hardened – Part Number: 532188967
Washer Hardened
PartSelect #: PS9015920
Manufacturer #: 532188967
This OEM hardened washer spreads load under the bolts of your lawn tractor. It is silver, made of metal, and is sold individually. Over time, the washer may become damaged due to wear and fatigue, and...
$4.99
  In Stock
Switch-Ign – Part Number: 532193350
Switch-Ign
★★★★★
★★★★★
(2)
PartSelect #: PS9020864
Manufacturer #: 532193350
This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various fu...
$14.93
  In Stock
Pin Cotter 7/16 Bow Tie Lock – Part Number: 532194209
Pin Cotter 7/16 Bow Tie Lock
PartSelect #: PS9020881
Manufacturer #: 532194209
$3.99
  In Stock
E-Ring Number 5133-75 – Part Number: 812000001
E-Ring Number 5133-75
★★★★★
★★★★★
(1)
PartSelect #: PS9155405
Manufacturer #: 812000001
E Ring Number 5133-75 is a black, metal ring for securing the position of other parts. If damaged it will become loose or fall off. Installation is rated as "Easy" and is done with a pair of pliers. R...
$5.29
  In Stock
Washer Clear Zinc – Part Number: 819191912
Washer Clear Zinc
PartSelect #: PS9144108
Manufacturer #: 819191912
$6.21
  In Stock
Washer 25/32 x 1-5/8 x 16 Ga. – Part Number: 532121748
Washer 25/32 x 1-5/8 x 16 Ga.
PartSelect #: PS9012535
Manufacturer #: 532121748
This OEM-certified washer provides support, spacing, and reduces friction between parts in your lawn equipment, typically working alongside bolts or screws. This washer has a thickness of 16 gauge and...
$3.99
  In Stock
Housing-Mandrel – Part Number: 532187281
Housing-Mandrel
PartSelect #: PS9015568
Manufacturer #: 532187281
  No Longer Available
Shield – Part Number: 532439870
Shield
PartSelect #: PS9024986
Manufacturer #: 532439870
$12.44
  On Order
Nut, Hex, Flangelock – Part Number: 532409149
Nut, Hex, Flangelock
PartSelect #: PS9022497
Manufacturer #: 532409149
Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carr...
$4.99
  In Stock
Belt Keeper – Part Number: 531169501
Belt Keeper
PartSelect #: PS17016497
Manufacturer #: 531169501
Belt Keeper
$8.95
  In Stock

Questions And Answers for 96043027500

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the 96043027500

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Take the wheel off. Place the key in the slot. Put the wheel back on.
Just described it.
Parts Used:
Key
  • Gary from PILESGROVE, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mower belt fell off was cut by the drive pulley.
Got the proper length and pulley size belt via serial number. Checked the length prior to ordering to assure the length would be correct.
Took mower onto a flat surface where I could get on both sides of the deck. And then placed the belt on the back pulleys first . Then I routed it through the idler pulleys to the power pulley where I turned the pulley with putting finger pressure against the belt as I turned the pulley. And it went on with no problem . It is that simple just be sure to turn the pulley and apply the belt in the same direction at the same time.
Parts Used:
Belt
  • Steve from DAMASCUS, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original shield was damaged
Removed original shield ( 2 bolts), replaced with new shield.
Parts Used:
Shield
  • Wayne from LAKEVILLE, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!