96042010700 Poulan Lawn Tractor - Overview

The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.

This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securing the mandrel housing to the mower deck of your lawn tractor. The main reason you would need to replace this part is if the old screw is da...Read moremaged or missing. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of your lawn mower or garden tractor. Over time, your dust cap may become damaged or lost due to wear and tear. If this happens, dirt and debri...Read mores can freely enter the axle and hub, causing damage. This is an easy repair to make and does not require any tools. Just look for the cap axle on the rim of the wheel to make your repair.

This lawn tractor mandrel assembly supports and drives the mower blade, ensuring smooth and stable rotation during operation. Built as a durable, all-in-one unit with internal bearings and shaft, it helps maintain consistent cutting performance while protecting the mower deck from impact damage. Replacing a worn or damaged assembly can restore proper blade function and ensure reliable, even cutting results.

This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various functions including starting, stopping, running and reversing. The switch works by connecting/disconnecting the circuit between the battery an...Read mored the ignition system. The switch can fail either from physical damage or faulty electrical wiring. If the ignition switch is no longer working, you will not be able to operate your equipment. To access the faulty switch, first disconnect the battery, and wiring harness. Squeeze the tabs on the sides of the switch and pull it out from its mounting position. Plug the new switch in place and ensure that the tabs are engaged. Finish the repair by reconnecting the wiring harness and battery. If your current key is in good working condition, you can continue to use it. However, if it is not, it is recommended to replace the key at the same time. Each ignition switch is sold individually.

This OEM exhaust gasket in lawn and garden equipment creates a seal between the engine block and the muffler or exhaust pipe so that exhaust gases do not leak. This is 3.30cm in diameter and 6.35cm in length. Your machine may have a loud hissing or popping sound coming from the exhaust area if the gasket was faulty. You may also notice th...Read moree presence of black soot around the gasket or the exhaust. Your gasket needs to be replaced if it appears worn or deformed. Otherwise, your machine will experience exhaust leaks. To detach the gasket, remove the fasteners that secure it using a socket or wrench. You can detach the gasket from your machine afterwards. Please bear in mind that this replacement part is sold individually.

This item has been OEM sourced to ensure a high-level of quality. The v-belt is intended to be used with riding lawnmowers from Husqvarna, Poulan, and Jonsered. The belt is used to link the engine pulley and the transmission pulley. This item drives the mower and after a lot of use it can wear down. This v-belt is a direct replacement of ...Read morethe original belt that would have been installed on a new mower. This belt is priced as an individual item.

This genuine OEM compression seat spring provides support and cushioning for the seat of your lawn equipment. It also effectively absorbs shocks and vibrations from uneven terrain. Typically, you can find it connected to the seat frame on the fender of your machine. If one or both springs are broken, your seat may feel unstable or uneven,...Read more compromising your comfort. It is essential to replace any damaged springs to restore a smoother ride. To replace the spring, gather a socket or wrench. Ensure your machine is turned off and engage the parking brake. Consult your user guide to locate the spring, which may be accessible from the underside of the seat or by removing the seat cushion. Use the socket or wrench to remove the fasteners securing the spring. Lift the spring off your machine carefully. Remember, different springs are used in your machine, so refer to the parts diagram to order the correct part. Also, note that this replacement part is sold individually, so confirm how many springs your machine requires beforehand.

This is mulching blade is specially designed for use with Craftsman riding lawn mowers/tractors. Mulching blades are shaped to keep the grass under deck for longer allowing it to be cut into smaller pieces. This provides natural mulch for your lawn since smaller clippings will decompose quicker, releasing their nutrients into the soil. It...Read more is made out of metal and it is sold individually. To install this mulch blade you would need a socket wrench. • Park the riding lawnmower on a flat surface such as a garage floor or a driveway • Disengage blades by pulling the cutting deck lever fully to the disengaged position • Set the riding lawnmower cutting deck to the highest position to access blades • Unscrew the blade bolt • Remove old blade and secure a new one in place • Reassemble in reverse order and test your new blade

This genuine Craftsman right-side spindle assembly is designed to securely attach the front wheel to the front axle of your lawn tractor. Made from durable metal and sold pre-assembled, it offers a reliable and time-saving replacement solution. Installation Tip: You may need pliers, a socket set, and a screwdriver to complete the insta...Read morellation. For best results, consult your model’s diagram to confirm compatibility before purchase.

It is a genuine OEM supplied part that is made for use with lawn and garden equipment. A muffler is utilized to soften the noise coming from the engine's exhaust. It is a high-quality replacement for a damaged or a missing component that was installed on a new equipment. Note, one durable metal body muffler is included. To ensure the prop...Read moreer replacement procedure, refer to the diagrams for your specific model. A wrench set will be needed to perform this repair.