96042003803 Poulan Lawn Tractor - Overview

The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.

This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securing the mandrel housing to the mower deck of your lawn tractor. The main reason you would need to replace this part is if the old screw is da...Read moremaged or missing. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This lawn tractor mandrel assembly supports and drives the mower blade, ensuring smooth and stable rotation during operation. Built as a durable, all-in-one unit with internal bearings and shaft, it helps maintain consistent cutting performance while protecting the mower deck from impact damage. Replacing a worn or damaged assembly can restore proper blade function and ensure reliable, even cutting results.

This high-lift lawn mower blade is designed to deliver strong airflow for improved cutting and efficient grass collection on 46-inch decks. Its curved design helps lift grass upright for a cleaner, more even cut while directing clippings smoothly into the bagging system or discharge chute to reduce clogging. Made from durable hardened ste...Read moreel, it offers long-lasting performance and reliable cutting power, making it an ideal replacement for maintaining a well-groomed lawn.

This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various functions including starting, stopping, running and reversing. The switch works by connecting/disconnecting the circuit between the battery an...Read mored the ignition system. The switch can fail either from physical damage or faulty electrical wiring. If the ignition switch is no longer working, you will not be able to operate your equipment. To access the faulty switch, first disconnect the battery, and wiring harness. Squeeze the tabs on the sides of the switch and pull it out from its mounting position. Plug the new switch in place and ensure that the tabs are engaged. Finish the repair by reconnecting the wiring harness and battery. If your current key is in good working condition, you can continue to use it. However, if it is not, it is recommended to replace the key at the same time. Each ignition switch is sold individually.

This is an OEM part sourced directly from the manufacturer. The belt is designed for use in Craftsman lawn tractors and riding mowers. This part is made of flexible rubber, and is used in conjunction with the pulley assemblies to transfer power from the engine to the mower blades. Over time, it may become brittle and cracked, requiring re...Read moreplacement. You may need a wrench when replacing this part. This item is sold individually

Keep your mower running at its best with this genuine replacement baffle, made specifically for Craftsman riding lawn mowers and garden tractors. This high-quality plastic part fits under the mower deck and helps direct grass clippings smoothly out of the discharge chute, giving you a cleaner, more even cut. Built for durability and a ...Read moreprecise fit, this baffle is sold individually. Please note that the mounting hardware is not included and must be purchased separately. To ensure proper installation, we recommend checking your model’s diagram for the exact location and fit. Whether you're replacing a worn part or doing seasonal maintenance, this baffle is a smart choice to keep your mower performing like new.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

This genuine replacement baffle is designed for use with select Husqvarna, Poulan, and Jonsered riding lawn tractors. Positioned under the mower deck, the baffle plays a key role in directing grass clippings out through the discharge chute, helping to maintain a clean and efficient cut. If your current baffle is damaged or missing, this h...Read moreigh-quality part offers a reliable solution. Made from durable materials and sold individually, this OEM baffle is built to match the original specifications for a secure fit. To install it, you’ll need a 12mm wrench, a 12mm socket, a T-40 Torx bit, and a flathead screwdriver. Be sure to consult your model’s diagram to confirm the correct placement and ensure proper installation.

This is a genuine Husqvarna and Poulan part for use with Lawn Tractors. The steering shaft kit contains the parts needed to connect the steering wheel to the sector gear. The most common reason for replacing the steering shaft is when the steering wheel will not turn the mower. Here is a list of tools that are needed to install the steeri...Read moreng shaft are a 3/4" socket, mallet, 3/8" socket, floor jack, pliers, and a 9/16" socket.

This genuine OEM compression seat spring provides support and cushioning for the seat of your lawn equipment. It also effectively absorbs shocks and vibrations from uneven terrain. Typically, you can find it connected to the seat frame on the fender of your machine. If one or both springs are broken, your seat may feel unstable or uneven,...Read more compromising your comfort. It is essential to replace any damaged springs to restore a smoother ride. To replace the spring, gather a socket or wrench. Ensure your machine is turned off and engage the parking brake. Consult your user guide to locate the spring, which may be accessible from the underside of the seat or by removing the seat cushion. Use the socket or wrench to remove the fasteners securing the spring. Lift the spring off your machine carefully. Remember, different springs are used in your machine, so refer to the parts diagram to order the correct part. Also, note that this replacement part is sold individually, so confirm how many springs your machine requires beforehand.

This genuine Craftsman right-side spindle assembly is designed to securely attach the front wheel to the front axle of your lawn tractor. Made from durable metal and sold pre-assembled, it offers a reliable and time-saving replacement solution. Installation Tip: You may need pliers, a socket set, and a screwdriver to complete the insta...Read morellation. For best results, consult your model’s diagram to confirm compatibility before purchase.