96042001800 Poulan Lawn Tractor - Overview

This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securing the mandrel housing to the mower deck of your lawn tractor. The main reason you would need to replace this part is if the old screw is da...Read moremaged or missing. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of your lawn mower or garden tractor. Over time, your dust cap may become damaged or lost due to wear and tear. If this happens, dirt and debri...Read mores can freely enter the axle and hub, causing damage. This is an easy repair to make and does not require any tools. Just look for the cap axle on the rim of the wheel to make your repair.

This lawn tractor mandrel assembly supports and drives the mower blade, ensuring smooth and stable rotation during operation. Built as a durable, all-in-one unit with internal bearings and shaft, it helps maintain consistent cutting performance while protecting the mower deck from impact damage. Replacing a worn or damaged assembly can restore proper blade function and ensure reliable, even cutting results.

This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various functions including starting, stopping, running and reversing. The switch works by connecting/disconnecting the circuit between the battery an...Read mored the ignition system. The switch can fail either from physical damage or faulty electrical wiring. If the ignition switch is no longer working, you will not be able to operate your equipment. To access the faulty switch, first disconnect the battery, and wiring harness. Squeeze the tabs on the sides of the switch and pull it out from its mounting position. Plug the new switch in place and ensure that the tabs are engaged. Finish the repair by reconnecting the wiring harness and battery. If your current key is in good working condition, you can continue to use it. However, if it is not, it is recommended to replace the key at the same time. Each ignition switch is sold individually.

This item is sourced from the original manufacturer. It is an authentic part used with riding lawn tractors/mowers. This is the switch that allows user to engage blades. To stop mower blades, place attachment clutch control in the "DISENGAGED" position. One (1) plastic switch is included per order. Mechanical switches tend to break with t...Read moreime, eventually requiring replacement. This is standard 8 terminal black switch. Replacing this switch is a simple task. • Make sure to disconnect spark plug • Once you gained access under the housing disconnect wires • Remove old switch by pushing on side tabs • Secure new PTO switch • Reconnect wires and spark plug • Test the unit

This genuine Craftsman hex gauge wheel is a replacement part sourced directly from the original manufacturer and is designed for use with riding lawn mowers. It attaches to the mower’s deck assembly and helps support the deck while providing traction, preventing it from making direct contact with the ground during operation. This helps ma...Read moreintain an even cut and protects both the deck and the lawn. The gauge wheel is sold individually, so be sure to check your model’s specifications to determine the quantity needed.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

This is a genuine replacement part that is sourced directly from the original equipment manufacturer for use with Husqvarna, Weed Eater and Poulan riding lawn mowers and garden tractors. The Mandrel Pulley 38 is the part that the belt attaches to and it helps to rotate the blade. You will need a wrench set to remove the old pulley and sec...Read moreure the new one. Keep in mind this high-quality component is made of durable metal and is sold as an individual item. Check the owners manual and the diagrams of your model for the exact location and the correct installation of this pulley.

This is a genuine Husqvarna and Poulan part for use with Lawn Tractors. The steering shaft kit contains the parts needed to connect the steering wheel to the sector gear. The most common reason for replacing the steering shaft is when the steering wheel will not turn the mower. Here is a list of tools that are needed to install the steeri...Read moreng shaft are a 3/4" socket, mallet, 3/8" socket, floor jack, pliers, and a 9/16" socket.

This genuine OEM compression seat spring provides support and cushioning for the seat of your lawn equipment. It also effectively absorbs shocks and vibrations from uneven terrain. Typically, you can find it connected to the seat frame on the fender of your machine. If one or both springs are broken, your seat may feel unstable or uneven,...Read more compromising your comfort. It is essential to replace any damaged springs to restore a smoother ride. To replace the spring, gather a socket or wrench. Ensure your machine is turned off and engage the parking brake. Consult your user guide to locate the spring, which may be accessible from the underside of the seat or by removing the seat cushion. Use the socket or wrench to remove the fasteners securing the spring. Lift the spring off your machine carefully. Remember, different springs are used in your machine, so refer to the parts diagram to order the correct part. Also, note that this replacement part is sold individually, so confirm how many springs your machine requires beforehand.

This genuine Craftsman right-side spindle assembly is designed to securely attach the front wheel to the front axle of your lawn tractor. Made from durable metal and sold pre-assembled, it offers a reliable and time-saving replacement solution. Installation Tip: You may need pliers, a socket set, and a screwdriver to complete the insta...Read morellation. For best results, consult your model’s diagram to confirm compatibility before purchase.