My Orders
96012006800 Poulan Lawn Tractor - Overview
Diagrams for 96012006800
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.72
In Stock
Lawn Mower Ring Clip
Part #812000029
The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle.
This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.
$6.72
In Stock
Washer Head Screw
Part #584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securing the mandrel housing to the mower deck of your lawn tractor. The main reason you would need to replace this part is if the old screw is da...Read moremaged or missing. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
Read less
$6.72
In Stock
Cap Axle Black 1 50 x 1 00
Part #532104757
This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of your lawn mower or garden tractor. Over time, your dust cap may become damaged or lost due to wear and tear. If this happens, dirt and debri...Read mores can freely enter the axle and hub, causing damage.
This is an easy repair to make and does not require any tools. Just look for the cap axle on the rim of the wheel to make your repair.
Read less
$31.00
In Stock
Lawn Mower Ignition Switch
Part #532193350
This ignition switch is an OEM replacement part found near the steering wheel or dashboard in lawn tractors and riding mowers. The switch has four symbols on the top side which indicate its various functions including starting, stopping, running and reversing. The switch works by connecting/disconnecting the circuit between the battery an...Read mored the ignition system. The switch can fail either from physical damage or faulty electrical wiring. If the ignition switch is no longer working, you will not be able to operate your equipment. To access the faulty switch, first disconnect the battery, and wiring harness. Squeeze the tabs on the sides of the switch and pull it out from its mounting position. Plug the new switch in place and ensure that the tabs are engaged. Finish the repair by reconnecting the wiring harness and battery. If your current key is in good working condition, you can continue to use it. However, if it is not, it is recommended to replace the key at the same time. Each ignition switch is sold individually.
Read less
$6.47
In Stock
Gasket-exhaust
Part #692236
This OEM exhaust gasket in lawn and garden equipment creates a seal between the engine block and the muffler or exhaust pipe so that exhaust gases do not leak. This is 3.30cm in diameter and 6.35cm in length. Your machine may have a loud hissing or popping sound coming from the exhaust area if the gasket was faulty. You may also notice th...Read moree presence of black soot around the gasket or the exhaust. Your gasket needs to be replaced if it appears worn or deformed. Otherwise, your machine will experience exhaust leaks. To detach the gasket, remove the fasteners that secure it using a socket or wrench. You can detach the gasket from your machine afterwards. Please bear in mind that this replacement part is sold individually.
Read less
$6.72
In Stock
Lawn Mower Bearing
Part #532003366
This is a genuine OEM part made for Craftsman lawn tractors and mowers. Bearings are used to buffer moving parts from damage due to friction. They also stabilize directional movement. Bearings are high-wear parts and are changed regularly. This metal bearing is sold individually. Gauges, washers, rings, etc. sold separately.
$6.72
In Stock
Lawn Mower Flangelock Hex Nut
Part #532409149
Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.
Read less
$51.23
In Stock
Ground Drive Belt
Part #532138255
This replacement v-belt is a genuine OEM sourced part. It is specially manufactured for use with riding lawn mowers. This is the the belt that is attached to the transmission pulley helping to drive the unit. Over time belts tend to wear out and stretch eventually requiring replacement. Inspect belts periodically and replace them as neede...Read mored to maintain peak performance. This part is made out of strong rubber material and it is sold individually. To complete this repair you will need a set of wrenches.
Read less
$26.35
In Stock
Lawn Mower Blade
Part #581116302
This replacement blade is specially made for use on riding lawn mowers and tractors. It is a genuine OEM sourced high quality item, it is not an aftermarket imitation. Usually two of these blades are used to cut the grass. Please note, this durable metal item is sold individually. To replace it you will need a wrench to remove the blade bolt.
$28.55
In Stock
Mandrel Pulley
Part #532173435
This is a genuine replacement part that is sourced directly from the original equipment manufacturer for use with Husqvarna, Weed Eater and Poulan riding lawn mowers and garden tractors. The Mandrel Pulley 38 is the part that the belt attaches to and it helps to rotate the blade. You will need a wrench set to remove the old pulley and sec...Read moreure the new one. Keep in mind this high-quality component is made of durable metal and is sold as an individual item. Check the owners manual and the diagrams of your model for the exact location and the correct installation of this pulley.
Read less
$83.79
In Stock
Axle Asm Front
Part #531171101
This authentic manufacturer-supplied part is specially designed for use with riding lawn mowers and garden tractors. It is a special component that wheel axles attach to. This is an identical replacement for a missing or a damaged axle assembly front that was installed on a new unit. A wrench set will be needed to perform this repair. Mak...Read moree sure to refer to the owner\\\'s manual and the appropriate diagrams for your model to ensure the proper repair procedure. Note, this high-quality axle assembly front is made of durable metal and is sold individually.
Read less
$8.98
In Stock
Spring, Compression, Seat, Black
Part #587613301
This genuine OEM compression seat spring provides support and cushioning for the seat of your lawn equipment. It also effectively absorbs shocks and vibrations from uneven terrain. Typically, you can find it connected to the seat frame on the fender of your machine. If one or both springs are broken, your seat may feel unstable or uneven,...Read more compromising your comfort. It is essential to replace any damaged springs to restore a smoother ride. To replace the spring, gather a socket or wrench. Ensure your machine is turned off and engage the parking brake. Consult your user guide to locate the spring, which may be accessible from the underside of the seat or by removing the seat cushion. Use the socket or wrench to remove the fasteners securing the spring. Lift the spring off your machine carefully. Remember, different springs are used in your machine, so refer to the parts diagram to order the correct part. Also, note that this replacement part is sold individually, so confirm how many springs your machine requires beforehand.
Read less
Common Symptoms of the 96012006800
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Wheel bushings were bad
29 of 48 people
found this instruction helpful.
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat
... Read more
other side.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Dryer runs no heat
2 of 9 people
found this instruction helpful.
Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats.
Other Parts Used:
Was this helpful?
Thank you for voting!