919175190 Craftsman Compressor - Overview

Frequently referred to as a Drain Plug, this Drain Valve is used to drain any condensation that has collected inside the tank to prevent the tank from rusting. It is not part of a kit or assembly, is sold individually, made of brass, is gold, and will be found at the bottom of the air tank. This part will need to be replaced when it is ...Read moreno longer able to provide a proper seal, or if it is visibly worn or damaged. You will need a wrench to complete this repair. Customers rate this repair as Easy.

This kit has been sourced from the original manufacturer to be used with air compressors from Porter Cable, DeVilbiss, and Delta. Overtime gaskets can become worn and may need to be replaced. It is recommended to apply new gaskets when servicing the compressor to ensure the parts are properly sealed when they are reassembled. This kit is sold complete, including all the items that are photographed.

Thread 18 TPI

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with air compressors. The hex head screw is used to secure the motor assembly to the bracket on the tank of the compressor. These screws are sold in packs of eight pieces and the packs are sold individually.

It is an OEM component which is designed for use with air compressors. This special nut sleeve assembly secures the pressure relief tube to the pressure switch. It is a high-quality replacement for a damaged or a missing hardware that was installed on a new unit. One durable metal nut sleeve assembly is included. A wrench will be needed t...Read moreo perform this repair. Check the appropriate diagrams for your model to ensure the proper replacement procedure. Make sure to drain the air before starting this repair.

This is a genuine replacement part manufactured for use with air compressors. The sight glass is used to monitor the oil level inside the pump crankcase. This sight glass is sold as an individual replacement part.

This is an authentic replacement part sourced directly from the manufacturer. The lock washer is commonly found in Craftsman equipment such as compressors, paint sprayers, drill presses, and lathes. This is a set of eight metal lock washers, which may be found in various locations in the machine, depending on model. Please be aware tha...Read moret there are different washers used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a screwdriver or wrench when replacing this item.

This is a genuine OEM sourced replacement filter which is supplied for use with Porter Cable, Delta and DeVilbiss air compressors. Its purpose is to ensure the air that goes into the unit is free of dust and other contaminants. Over time the filter may get dirty and clogged restricting the airflow, inspect it periodically and replace as n...Read moreeeded to maintain peak performance. Please note this high-quality component is made of durable foam material and it is sold individually.

This is an original Porter Cable replacement part. The assembly filter is commonly found in compressors. This part is made of high-quality plastic and is used to house the filter. The item includes the front and back housing. You may require a screwdriver to replace this part.