Frequently referred to as a Drain Plug, this Drain Valve is used to drain any condensation that has collected inside the tank to prevent the tank from rusting. It is not part of a kit or assembly, is sold individually, made of brass, is gold, and will be found at the bottom of the air tank.
This part will need to be replaced when it is ...Read moreno longer able to provide a proper seal, or if it is visibly worn or damaged. You will need a wrench to complete this repair.
Customers rate this repair as Easy.
Restore air pressure in a compatible oil free air compressor with this cylinder service kit, it includes a cylinder sleeve, compression ring, piston rod screw, and two sealing rings, replace worn parts when the compressor runs but makes little or no air, unplug the compressor and release all tank pressure before repair, check the model and type number before ordering.
This fan is an exact replacement part for use in air compressors and is sourced directly from the manufacturer. It is made of durable black plastic and is used to cool the compressor during operation. It is not part of a kit or assembly and is sold individually.
This part is located on the end of the motor shaft and will be visibly brok...Read moreen or worn when it needs to be replaced. You will need a screwdriver, a socket set, and a drill to complete this repair.
Customers rate this repair as Easy.
This power cord is a genuine high quality item, it is not an aftermarket imitation. It is sourced directly from original equipment manufacturer for use with electric air compressors. It is connected to a standard US outlet to supply power to the unit. Please note, this rubber insulated power cord is sold individually. You will need a screwdriver to replace this item.
Sourced directly from the manufacturer, this part is an exact replacement for various air compressors. Its primary purpose is to control the airflow through the pump. This part is an assembly that includes the plate gasket and seals.
When this part is malfunctioning, the tank will take longer to fill or will not be able to fill at all. I...Read moret will need to be replaced once it becomes damaged or worn. You will need a wrench set and a socket set to complete this repair.
Customers rated this repair as Easy.
This is a genuine Craftsman part for use with Craftsman Air Compressors. The compression ring creates an airtight seal between the cylinder and piston and helps facilitate heat transfer between the piston and cylinder wall. The compression ring on a piston head is a wear and tear item. It is, often, a cause of an air compressor failing to...Read more produce air. This part is sold individually. Unplug the air compressor and bleed air from the tank before installing this part. Wear work gloves to protect your hands.
This wheel is a genuine OEM replacement part used in portable air compressors. It consists of a plastic rim and rubber tire with an outer diameter of 9.5 inches. It is held in place on the compressor axle by a shoulder bolt and nut. The wheel allows the equipment to move smoothly during use. If the tire is punctured, or the rim is damaged...Read more, the wheel will need to be replaced to restore the portability of your equipment. If the nut and bolt are worn down, it is recommended to replace them at the same time. Remove the nut and bolt that secure the wheel and pull it off the axle. Place the new wheel in position and secure it with the fasteners (sold separately). Each wheel is sold individually.
This is an authentic Craftsman replacement part manufactured for use with air compressors. The muffler is used to reduce the noise created by the compressor while running. This muffler is available as an individual replacement part.
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. rnrnThere are many causes for O-Ring failure. The most common among power tools are: • Extrusion and Nibbling - The O-ring has ragged, tattered edges. ...Read moreThese are commonly caused by pressure spikes which shear off tiny "bites" from the o-ring, or caused by clearance gaps. • Abrasion - One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that it too rough, contains grit or is too smooth to allow lubrication. • Over Compression - The O-ring is flattened on both sides and may have a "ring" split along its length. Commonly caused by excessive pressure or heat. • Heat Hardening - The O-ring has a pitted or cracked surface, and is often flattened on both sides. Caused by temperature exceeding o-ring capacity. • Weather/Ozone Cracking - The O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching (greater that 5%) causes similar cracking.
Introducing a genuine Craftsman Pressure Switch thoughtfully designed to ensure peak efficiency for your Craftsman appliances. This robust appliance part is a critical component in many different types of equipment making it an essential purchase for a seamless and trouble-free functioning. This pressure switch is meticulously engineered ...Read morefor reliability and longevity ensuring a long service life for your weekly home maintenance tasks. Don't compromise on quality make the smart choice for your Craftsman appliance with this expertly crafted pressure switch. Proven and reliable the Craftsman Pressure Switch is the ideal choice for keeping your device operating at its best. Trust in Craftsman to deliver quality and durability in every component.
This is an OEM part sourced directly from the manufacturer. The filter kit is designed for use in Craftsman air compressors. This part includes a foam filter and a plastic frame, and it is used to remove dust and debris from the air. You may require a wrench when replacing this part. This item is sold individually.
This is an original part from Craftsman. The regulator is made for use with many air compressors, and is sold individually. This component manages the air pressure level from the tank. A wrench set is required for the removal and replacement. It is recommended to refer to the manual for further safety and repair instructions.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Debra - For model number 919-168700
June 24, 2026
My husband got a recall for this Craftsman Air Compressor Model # 919-168700 several years ago for a free repair kit. And he is very ill now so I've been going through his papers & found this. Is there anywhere I can find a repair kit for this?
Hello Debra, thank you for the question. Based on our research, the repair kit you are looking for is part number PS18993125. We hope this is what you were looking for!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The air was bypassing the compressor gaskets and cylinder wall was worn out
18 of 24 peoplefound this instruction helpful.
Charles from GARRISON, TX
Easy
30 - 60 mins
Screw drivers, Socket set
1 remove cover 2 unhook air line to tank 3 remove head bolts 4 remove intake from head 5 remove flywheel bolt to free up pump piston 6 remove screw on top of piston to change out gasket 7 remove the cylinder sleeve install piston from the top 8 reassemble piston rod end and the flywheel 9 on th
... Read moree head cover are two gaskets one on top and one on the bottom head 10 insert intake piece and bolt the head cover back in place 11 reinstall the air line and unit cover and secure with three cover screws
Read less
Was this helpful?
Thank you for voting!
Can't find this special screw used on many housings etc
4 of 6 peoplefound this instruction helpful.
Tim from Tucson, AZ
Very Easy
15 - 30 mins
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements. My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called
... Read more AGC-408 by craftsman.
Read less
Was this helpful?
Thank you for voting!
Broken ground on original plug
2 of 2 peoplefound this instruction helpful.
Debra from PRESCOTT VLY, AZ
Really Easy
15 - 30 mins
Screw drivers
Removed cover & old cord. Replaced with new cord & replaced cover. Works perfect.
My Orders
