9130 - Overview

This wheel assembly helps your leaf blower to move smoothly on surfaces like grass, pavement, or gravel and allows you to easily maneuver the machine and direct the airflow. It has a width of 4.1 inches, a diameter of 3.5 inches, and a rim size of 4 inches. If your wheel assembly has cracks, missing parts, or bent spoke, you need to repla...Read morece it. You may notice that your machine wobbles or cannot spin freely. When replacing the wheel assembly, you will be able to pull it away from your machine once you unscrew any of its retaining fasteners with a wrench or screwdriver. This OEM-verified assembly is sold individually, so consult your user manual to check how many your machine will need.

This is a genuine Broil-Mate, Broil King, Huntington, and Sterling part sourced directly from the manufacturer for use in gas grills. The grease shield goes next to the inner rear panel. A wrench and a screwdriver may be necessary during the installation of this item. It may become broken and will need to be replaced. This is made of metal and is available as an individual replacement part.

This deflector spring is supplied by the original manufacturer for use in leaf blowers. The deflector is a plastic/metal plate that allows the user to control the direction of the airflow made by the blower fan. The spring is a metal piece responsible for applying tension to the deflector which enables it to stay in the correct position a...Read morend maintain a steady direction. Over time the spring may wear out, corrode, or break causing it to lose tension. A defective deflector spring will not allow you to control the airflow direction, the spread of leaves/debris, and it will be difficult to target specific areas to work on. Use a pair of pliers to remove the clips that secure the faulty spring and pull it off the nozzle of the blower. Place the new one in position and secure it with the appropriate fasteners.

This is an original Little Wonder replacement part. The spacer is found on wheeled blowers. This part is made of metal, and is used to provide a working distance between the front wheel and the bracket. You will require a wrench when replacing this part. This item is sold individually.

This is an authentic OEM which is supplied directly from the original parts manufacturer for a Little Wonder Output Blower. The knob is used to secure the side deflector to the blower assembly. It is made of a durable plastic and is sold as an individual replacement part.

This is a genuine manufacturer-sourced replacement throttle cable which is designed for Little Wonder high output blowers. The throttle cable is connected to the carburetor and it stops the engine when you shift the lever to the full choke position. It is a high-quality rubber insulated cable which is sold individually. Make sure to refer to the appropriate diagrams for your model to ensure the correct repair.

This metal grease pan is an original part sourced directly from Broil-Mate for use with gas grills. The pan is used to collect excess grease that is produced when cooking and allows for easy cleanup. Please check the appropriate diagrams for your model for the correct location and application of this part. One item is included per order.

The key (915X) is not included with the fan, but can be purchased separately.

This throttle cable is designed for use with various leaf blower models and is sold as an individual part. This cable is connected directly to the carburetor and will stop the engine when shifted to the full choke position. This cable is made of high-quality rubber that insulates a metal cable, so lubricating the cable will help with its ...Read moreoverall longevity and help it operate smoother. If you find that your leaf blower has issues starting or cannot reach its maximum power, these are signs that the throttle cable could need replacing. Before replacing the throttle cable, it is important to note how the cable is connected to the carburetor. It is also crucial that when the new cable is replaced, that the manufacturer approved level of tension is applied to the new cable. Make sure to not only keep the area around the cable clean, but to regularly inspect the cable, lubricate it, and take notice of any issues to keep it performing smoothly.