91143559590 Kenmore Cooktop - Overview

Diagrams for 91143559590

See every part. Know exactly what you need.

MAIN TOP SECTION

Parts for the 91143559590

$22.52

Drip Bowl - 8 Inch

★★★★★

(5)

Part #WB31K5025

The surface element or the coil surface element transfers heat to the area on top of the range. The element is 8 inches in diameter. If your surface element does not heat, overheats, or is inconsistent, replacing this part can be the solution. If you would like to determine whether the element is defective, use a multimeter. Before instal...Read more

Read less

$74.79

Surface Burner Terminal Block Kit

★★★★★

(7)

Part #WB17X210

This is a surface burner terminal block kit, also known as range surface element receptacle, for an oven, range, or stove. The kit comes with the terminal block, mounting clip, and wires. This surface burner terminal block kit connects the wiring harness to the surface elements. It is important to shut off the power to the appliance befor...Read more

Read less

Burner Control Knob Seal

Part #WB32K5024

Sold individually. This seal prevents any leaks from getting under the cooktop or into the switch area.

$28.42

Range Indicator Light

Part #WB25X10024

Porcelain Burner Drip Bowl - 8"

Part #PM32X5041

Control Seal - Gray

Part #WB32K5027

This seal is used on White models.

INF KNOB Black

Part #WB3K5132

Infinite Control

Part #WB23K5043

Control Seal

Part #WB32K5048

This part is used to seal around the knob in the control panel.

INFINIT KNOB

Part #WB3K5167

INFINITE CONTROL-1400W

Part #WB23K5042

$81.84

MAINTOP SEAL-AD

Part #WB32K5031

Common Symptoms of the 91143559590

How this model fails, and the parts that fix it.

Element will not heat

Fixed by
these parts

Show All

Videos related to the 91143559590

Watch our pros, then fix it yourself.

Replacing the Surface Burner Terminal Block Kit

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

There was no heat on the coils.

48 of 52 people found this instruction helpful.

Shaohui from East Lansing, MI
Easy
15 - 30 mins
Pliers

I opened the lid, and found that the terminal blocks were burnt, the wires were melted. I ordered one set of terminal block to replace the burnt one, and it worked. Before I started, I shut off the electricity in the whole house to be safe.

Was this helpful?

Surface burner coil did not work.

23 of 33 people found this instruction helpful.

Gregory from Mont Belvieu, TX
Easy
30 - 60 mins
Nutdriver, Screw drivers, Socket set

TURN OFF ALL POWER TO KITCHEN. Took off all burner coils and plates below them. Lift hood. Locate part. Remove old part and replace with new part in same way as was previously installed. The wire that comes with the kit is actually too much wire, but just arrange it the best you can and leave it....no big deal. I didn't have a magnet ... Read more

Read less

Was this helpful?

Old Terminal Block was arcing.

1 person found this instruction helpful.

Robert from HOUSTON, TX
Really Easy
15 - 30 mins
Screw drivers

Cut Wires to old terminal block and wired in new Terminal Block

Was this helpful?