Models > 91143455590

91143455590 Kenmore Cooktop - Overview

Sections of the 91143455590

[Viewing 1 of 1]

Manuals & Care Guides for 91143455590

Click to download
Keep searches simple, eg. "belt" or "pump".
Drip Bowl - 6" – Part Number: WB31K5024
Drip Bowl - 6"
★★★★★
★★★★★
(10)
PartSelect #: PS244255
Manufacturer #: WB31K5024
This is a drip bowl for your range or cooktop. The drip bowl sits beneath the burner of an electric range and collects any spills that occur while cooking. The bowl is 6 inches in diameter and represe...
$22.99
  In Stock
Drip Bowl - 8 Inch – Part Number: WB31K5025
Drip Bowl - 8 Inch
★★★★★
★★★★★
(3)
PartSelect #: PS244257
Manufacturer #: WB31K5025
The surface element or the coil surface element transfers heat to the area on top of the range. The element is 8 inches in diameter. If your surface element does not heat, overheats, or is inconsisten...
$23.97
  In Stock
Surface Burner - 8 Inch - 2100W – Part Number: WB30X253
Surface Burner - 8 Inch - 2100W
★★★★★
★★★★★
(4)
PartSelect #: PS244014
Manufacturer #: WB30X253
This part is the replacement surface burner or element for your range. It is approximately 8 inches in diameter, and 2100 watts. The surface burner connects to the power source and when it is turned o...
$63.08
  In Stock
Surface Burner Terminal Block Kit – Part Number: WB17X210
Surface Burner Terminal Block Kit
★★★★★
★★★★★
(6)
PartSelect #: PS232606
Manufacturer #: WB17X210
This is a surface burner terminal block kit, also known as range surface element receptacle, for an oven, range, or stove. The kit comes with the terminal block, mounting clip, and wires. This surface...
$78.35
  In Stock
Rolled Terminal Surface Unit - 6" - 1250W – Part Number: WB30X254
Rolled Terminal Surface Unit - 6" - 1250W
★★★★★
★★★★★
(1)
PartSelect #: PS244015
Manufacturer #: WB30X254
$60.28
  In Stock
Burner Control Knob Seal – Part Number: WB32K5024
Burner Control Knob Seal
PartSelect #: PS244555
Manufacturer #: WB32K5024
Sold individually. This seal prevents any leaks from getting under the cooktop or into the switch area.
  No Longer Available
Porcelain Burner Drip Bowl - 8" – Part Number: PM32X5041
Porcelain Burner Drip Bowl - 8"
PartSelect #: PS220981
Manufacturer #: PM32X5041
  No Longer Available
INDICATOR LIGHT – Part Number: WB25X10024
INDICATOR LIGHT
PartSelect #: PS3406143
Manufacturer #: WB25X10024
$20.99
  In Stock
Control Seal - Gray – Part Number: WB32K5027
Control Seal - Gray
PartSelect #: PS244558
Manufacturer #: WB32K5027
This seal is used on White models.
  No Longer Available
6 PORC BOWL – Part Number: PM32X5040
6 PORC BOWL
PartSelect #: PS220979
Manufacturer #: PM32X5040
$26.41
  In Stock
Terminal Block Bracket – Part Number: WB1K5128
Terminal Block Bracket
PartSelect #: PS234197
Manufacturer #: WB1K5128
  No Longer Available
Screw – Part Number: WB01X32746
Screw
PartSelect #: PS12709786
Manufacturer #: WB01X32746
$8.06
  In Stock

Questions And Answers for 91143455590

Be the first to ask our experts a question about this model!

Common Symptoms of the 91143455590

[Viewing 1 of 1]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
There was no heat on the coils.
I opened the lid, and found that the terminal blocks were burnt, the wires were melted. I ordered one set of terminal block to replace the burnt one, and it worked. Before I started, I shut off the electricity in the whole house to be safe.
Parts Used:
Surface Burner Terminal Block Kit
  • Shaohui from East Lansing, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
47 of 51 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Surface burner coil did not work.
TURN OFF ALL POWER TO KITCHEN. Took off all burner coils and plates below them. Lift hood. Locate part. Remove old part and replace with new part in same way as was previously installed. The wire that comes with the kit is actually too much wire, but just arrange it the best you can and leave it....no big deal. I didn't have a magnet, but needed one. The wire from burner coil to switch runs through a harness which is screwed on to the body of the oven (below the range). Be careful NOT to drop it behind oven when taking it out. I dropped it and took forever to get it. That turned a 20 minuate job into an hour and a half. Otherwise this is an easy job that anyone can do. Refrigerator compressor is next. Have fun.
Parts Used:
Surface Burner Terminal Block Kit
  • Gregory from Mont Belvieu, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
23 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Large burner would not heat
I ordered the wrong part to start with. (READ CAREFULLY!) I reordered the correct part and it was simple. I unpluged the old element, plugged in the new one replaced the drip pan and trim ring and we were back cooking.
Service was fast, lady I spoke with on the phone to exchange parts was knowegable and nice. Great people to deal with.
Parts Used:
Surface Burner - 8 Inch - 2100W
  • Charles from Carthage, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!