EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

9114338590 Kenmore Cooktop - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drip Bowl - 6 Inch – Part Number: WB32X107
$21.45
In Stock
Drip Bowl - 6 Inch
★★★★★
★★★★★
(27)
Part #WB32X107
The drip bowl on your range is designed to catch any spills that may occur when cooking. This drip bowl is chrome in color and is 6 inches in diameter. The chrome drip bowl is intended for use with rolled, terminal-style plug-in surface element units. The drip bowl is located beneath the surface element, so you will need to remove the element prior to swapping out the old drip bowl for a new one. Many of our customers have rated this repair as easy, and you will not require any tools to complete it. This part is sold individually.
Drip Bowl - 8 Inch – Part Number: WB32X106
$25.75
In Stock
Drip Bowl - 8 Inch
★★★★★
★★★★★
(15)
Part #WB32X106
Drip bowls are located under the heating elements and catch grease and spills that come from cooking on your stove top. If your drip bowl is damaged or rusted, it could allow grease to drip inside your range. This 8 inch chrome drip bowl fits most electric ranges. Before you replace your damaged drip bowl, make sure the element is turned off and cool to the touch. Installation is easy, just remove the element, replace the current drip bowl, and reattach the element. Make sure the small hole on the bowl lines up with the element socket. Drip bowls are sold separately.
Surface Burner - 8 Inch - 2100W – Part Number: WB30X253
$58.42
On Order
Surface Burner - 8 Inch - 2100W
★★★★★
★★★★★
(6)
Part #WB30X253
This part is the replacement surface burner or element for your range. It is approximately 8 inches in diameter, and 2100 watts. The surface burner connects to the power source and when it is turned on, it heats up to cook your food. If you turn on the burner and the element does not heat up, it will need to be replaced. To complete this repair, first be sure to disconnect the power from your range, and ensure the burner is cool to the touch. Then, gently remove the burner from the terminals and replace it with the new one. This part is sold individually, and is an OEM part sourced directly from the manufacturer.
Ignitor Mounting Screw – Part Number: WB1X1293
$16.05
In Stock
Screw – Part Number: WB1M1
$13.92
In Stock
Screw
★★★★★
★★★★★
(1)
Part #WB1M1
Sold Individually.
Screw – Part Number: WB1X1130
$16.05
In Stock
Screw
★★★★★
★★★★★
(2)
Part #WB1X1130
Sold Individually.
Element Disc – Part Number: WB30X260
No Longer Available
Element Disc
★★★★★
★★★★★
(3)
Part #WB30X260
This is an element disk but may also be known as a surface element and it is a part for your range. The function of this disk is to give heat to the cooking area on top of the range. This disk is for your seven-inch element, and is off-black in color. The most common reason for needing to replace this part is if your element is no longer heating, or is taking too long to heat. To make this repair you will need a screwdriver set, a nut driver, and a pair of needle-nose pliers.
Element Center Medallion – Part Number: WB31X5021
No Longer Available
Element Center Medallion
Part #WB31X5021
This medallion is located in the middle of the surface burner.
Range Surface Element – Part Number: WB30X261
No Longer Available
Range Surface Element
Part #WB30X261
Screw – Part Number: WB01X32746
$15.00
In Stock
Screw
Part #WB01X32746
Screw – Part Number: WB1X1118
$15.00
Special Order
Screw
Part #WB1X1118

Common Symptoms of the 9114338590

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Large burner very slow heating
19 of 23 people found this instruction helpful.
  • Drusilla from Bloomfield, NY
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Downdraft stove is over 20 years old, but everything else works fine and it would be a real pain to replace it.

This quick-heat back burner is part of a two burner plug- in unit which takes up half of the top of the stove.

I removed the top from the rest of the unit easily removing five screws. Because of the age an d long use it was tough getting the old nut off which holds on the disc, but with the help of some spray lubricant it came off. The old wire ends were also rusted, and to get them off I bent up the old holder, which was going to be discarded anyhow. It was a simple matter to plug in the new unit, tighten the nut, clean up the lubricant with a paper towel, and reassemble the unit, which I cleaned inside since it was dusty. After plugging in the unit I turned on the burner...it works like new and has saved me a very costly replacement. I like it so much that even though the front element works perfectly I am considering buying that disc too just so they will match. Finding your company was absolutely great, and I would recommend you to anyone looking for parts. I still have the manual for this stove so I would feel confident in replacing pretty much any part needed....not bad for a 72 year old woman, (My Dad taught me to do my own work and I am a passable carpenter and plumber; a little more wary when it's something electrical !
Was this helpful?
Thank you for voting!
Could not find the correct replacements (burners & drip pans)
13 of 21 people found this instruction helpful.
  • Barbara from JEFFERSON, GA
  • Very Easy
  • Less than 15 mins
After months of buying the wrong parts & cost I discovered this site So easy to order & quick delivery, plus very easy installation. Thank you. I also wanted to add that the reps (Tanisha & Matthew) were extremely helpful & informative. I can only hope all the reps equal their performance. I will definitely be using this site, before an y other source. Knowledge & cost is also important to me & that need was met. Good job!
Was this helpful?
Thank you for voting!
Large burner would not heat
5 of 6 people found this instruction helpful.
  • Charles from Carthage, NY
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I ordered the wrong part to start with. (READ CAREFULLY!) I reordered the correct part and it was simple. I unpluged the old element, plugged in the new one replaced the drip pan and trim ring and we were back cooking.
Service was fast, lady I spoke with on the phone to exchange parts was knowegable and nice. Great people to deal wi th.
Was this helpful?
Thank you for voting!