Models
>
9114242090
9114242090 Kenmore Cooktop - Overview
Sections of the 9114242090
[Viewing 2 of 2]Keep searches simple, eg. "belt" or "pump".
Drip Bowl - 6"
PartSelect #: PS244255
Manufacturer #: WB31K5024
This is a drip bowl for your range or cooktop. The drip bowl sits beneath the burner of an electric range and collects any spills that occur while cooking. The bowl is 6 inches in diameter and represe...
$23.84
In Stock
Drip Bowl - 8 Inch
PartSelect #: PS244257
Manufacturer #: WB31K5025
The surface element or the coil surface element transfers heat to the area on top of the range. The element is 8 inches in diameter. If your surface element does not heat, overheats, or is inconsisten...
$23.97
In Stock
Surface Burner - 8 Inch - 2100W
PartSelect #: PS244014
Manufacturer #: WB30X253
This part is the replacement surface burner or element for your range. It is approximately 8 inches in diameter, and 2100 watts. The surface burner connects to the power source and when it is turned o...
$63.08
In Stock
Rolled Terminal Surface Unit - 6" - 1250W
PartSelect #: PS244015
Manufacturer #: WB30X254
$60.28
In Stock
Porcelain Burner Drip Bowl - 8"
PartSelect #: PS220981
Manufacturer #: PM32X5041
No Longer Available
Element Center Medallion
PartSelect #: PS244486
Manufacturer #: WB31X5021
This medallion is located in the middle of the surface burner.
$7.16
Special Order
Infinite Control Switch - 8"
PartSelect #: PS236365
Manufacturer #: WB23M1
This is an 8-inch infinite control switch, also known as surface element switch, for a range, oven, or stove. The infinite control switch maintains the heat of your surface burner. Be sure to disconne...
No Longer Available
Surface Burner Switch - 6"
PartSelect #: PS236379
Manufacturer #: WB23M2
This is a surface burner switch. It may also be known as an infinite control switch and it is used in conjunction with your range. The purpose of this part is to control the surface element off and on...
No Longer Available
Questions And Answers for 9114242090
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 9114242090
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Large burner would not heat
I ordered the wrong part to start with. (READ CAREFULLY!) I reordered the correct part and it was simple. I unpluged the old element, plugged in the new one replaced the drip pan and trim ring and we were back cooking.
Service was fast, lady I spoke with on the phone to exchange parts was knowegable and nice. Great people to deal wi ... Read more th.
Service was fast, lady I spoke with on the phone to exchange parts was knowegable and nice. Great people to deal wi ... Read more th.
Read less
Parts Used:
-
Charles from Carthage, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Previous home owners replaced 3 drip bowls with wrong style
I removed the heating elements and the drip bowls (wrong style). I then positioned the correct drip bowls on the stove and reinserted the heating elements. I snapped the heating coils into the small slots on the far side of the bowls to make sure that the heating elements would lay flat.
The whole process took less than 2 minutes.
The whole process took less than 2 minutes.
Parts Used:
-
Diane from Corpus Christi, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old unit was bent and didn't work properly
I unplugged the old unit and plugged in the new one! It works.
Parts Used:
-
Christine from Danbury, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!