91137 Lawn Mower - Overview

The Snap Clip is a silver, metal part used to prevent the wheels from falling off, by securing it to the axle. If broken or damaged it should be replaced, or the wheel may fall off.

This genuine manufacturer-sourced component which is specially made for use with Ariens snowblowers. The key helps to secure the gear on the axle, unfortunately, over time it may wear out, get damaged or lost eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct location an...Read mored application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This flange split bushing is a genuine OEM part used to add stability and reduce friction damage between rotating parts, such as drive shafts and gears, in a variety of outdoor power equipment. The bushing has an outside diameter of 1 1/3 inches and an inner diameter of 1 inch, as well as a flange on one end which prevents the bushing fro...Read morem moving during use. It is made of nylon which is a type of material known for its resistance to wear, and ability to self-lubricate. The bushing is split along its length, for easy removal and installation. The bearing may become damaged if it is inadequately lubricated, or from continuous exposure to heat and chemicals. If you notice that your equipment is excessively noisy, shaking, and difficult to maneuver, you will need to replace the bushing promptly to prevent damage to the equipment. Remove the fasteners that secure the bushing and use a bearing puller to detach the old bushing. Place the new bushing in position and secure it in place.

This torsion spring is a genuine OEM replacement designed for snow throwers and walk-behind outdoor power equipment. It provides the controlled tension needed for proper operation of safety and control mechanisms, helping ensure smooth, reliable performance. Made from durable metal for long service life, it’s an ideal replacement when a f...Read moreatigued or broken spring causes poor control response or reduced equipment reliability.

This manufacturer-sourced replacement screw is designed for use with Ariens snow blowers and throwers. As a standard hardware component, it has multiple potential applications depending on the model. Made of durable metal, this part is sold individually. A wrench is required to tighten or loosen the screw during installation or removal. For proper use and placement, please refer to your equipment’s diagrams.

This part is sourced directly from the manufacturer, is not part of a kit or assembly, and is sold individually. The Bushing is made of durable black rubber and is usually found on the fuel tank. Through regular use, the Bushing may become worn, damaged, or dried out, at which point it will need to be replaced. Customers rate this repair as Easy.

This flange bushing is a genuine OEM replacement designed for use on lawn mowers and snow blowers. It functions as a bearing surface to reduce friction and abrasion between moving components, helping ensure smooth, reliable operation. Made from durable plastic or rubber material, it’s commonly replaced when the original bushing becomes cracked, brittle, or worn from regular use.