Models > 91133385890

91133385890 Kenmore Cooktop - Overview

Sections of the 91133385890

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Large Burner Drip Bowl – Part Number: WB31K5079
Large Burner Drip Bowl
★★★★★
★★★★★
(4)
PartSelect #: PS244310
Manufacturer #: WB31K5079
This is a replacement drip bowl for your range or oven. The drip bowl sits beneath the burner element and collects any drips or spills. This drip bowl is 8 inches in diameter and is used to replace th...
$33.08
  In Stock
Surface Burner Spark Electrode – Part Number: WB13K18
Surface Burner Spark Electrode
★★★★★
★★★★★
(2)
PartSelect #: PS231276
Manufacturer #: WB13K18
This part helps your burner ignite and produce flame.
$41.95
  In Stock
Medium Burner Drip Bowl – Part Number: WB31K5080
Medium Burner Drip Bowl
★★★★★
★★★★★
(4)
PartSelect #: PS244311
Manufacturer #: WB31K5080
This burner drip bowl is sold individually. It is white on the top side, and black underneath.
$29.99
  In Stock
Ignitor Mounting Screw – Part Number: WB1X1293
Ignitor Mounting Screw
★★★★★
★★★★★
(2)
PartSelect #: PS234519
Manufacturer #: WB1X1293
Sold Individually.
$9.64
  In Stock
SCREW – Part Number: WB1K5062
SCREW
PartSelect #: PS234148
Manufacturer #: WB1K5062
$11.59
  In Stock
Screw – Part Number: WH2X930
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS271689
Manufacturer #: WH2X930
This screw is sold individually.
$13.99
  In Stock
Burner Grate – Part Number: WB31T10007
Burner Grate
★★★★★
★★★★★
(1)
PartSelect #: PS244391
Manufacturer #: WB31T10007
Sold Individually.
$125.55
  In Stock
Screw – Part Number: WB1M1
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS234320
Manufacturer #: WB1M1
Sold Individually.
$7.76
  In Stock
Small Burner Drip Bowl – Part Number: WB31K5081
Small Burner Drip Bowl
★★★★★
★★★★★
(2)
PartSelect #: PS244312
Manufacturer #: WB31K5081
This burner drip bowl is sold individually. It is white on the top side, and black underneath.
$32.23
  In Stock
Burner Bowl  Seal – Part Number: WB32M10
Burner Bowl Seal
PartSelect #: PS244599
Manufacturer #: WB32M10
This gasket goes under the burner bowl to help protect the glass from high heat. Sold individually.
  No Longer Available
Foam Rubber Tape – Part Number: WB02X26088
Foam Rubber Tape
★★★★★
★★★★★
(2)
PartSelect #: PS11726663
Manufacturer #: WB02X26088
This is foam tape and it is usually used in conjunction with your range, specifically on the cooktop. Its purpose is to help seal the edges of the cook top to the counter top. Another of its functions...
$39.82
  In Stock
Gas Pressure Regulator – Part Number: WB19T10078
Gas Pressure Regulator
★★★★★
★★★★★
(2)
PartSelect #: PS2337785
Manufacturer #: WB19T10078
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane. This valve automatically cuts off the flow of gas at a certain pressure.
$54.42
  In Stock

Questions And Answers for 91133385890

Be the first to ask our experts a question about this model!

Common Symptoms of the 91133385890

[Viewing 3 of 3]
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Gas igniter glows, but will not light
Fixed by
these parts
Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burner igniter needed to be replaced
Assumed the entire top of the range would have to be lifted off. Removed the three screws inside the top of the over door and then noticed the two screws holding the dish around the burner. They were tight and required WD-40 and then a sharp tap and came off.
Important: Notice the direction your old igniter is plugged into the wire. It is not clear and can go on either way.
Parts Used:
Surface Burner Spark Electrode
  • Thomas from Bloomsbury, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
37 of 63 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drip pans needed to be replaced.
Simiple repair. Determined drip pan size (sm, med., lg.) removed 2 screws holding drip pan, placed gasket around new drip pan and installed. Repaired took less than 5 minutes.
Parts Used:
Burner Bowl Seal
  • Steve from Broken Arrow, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
18 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The porcelain had chipped on the burner bowls
Removed the two screws holding the porcelain burner bowl. Disconected the electric igniter by removing the "w" clip on the underside of the bowl. Then disconnected the igniter from the electric supply cord. Reverse these directions using the new urner bowl.
Really easy.
Parts Used:
Small Burner Drip Bowl Medium Burner Drip Bowl Large Burner Drip Bowl
  • Paula from Seal Beach, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
14 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!